| Author |
Message |
|
turboawdfanatic
Moderator
Joined: Tue Aug 14, 2007 2:39 pm Posts: 3013 Location: La Habra
|
 Re: 20g
You need to read through this: http://www.roadraceengineering.com/2gupgradepath.htmYou're getting way ahead of yourself. Listen to people's advice on fixing small problems like a CEL caused by the BCS before trying to bypass it with a new turbo and a built motor.
|
| Mon May 10, 2010 11:20 am |
|
 |
|
Black_gst
Death to Head Gaskets!
Joined: Tue Jan 27, 2009 10:38 am Posts: 1979
|
 Re: 20g
fuk it, throw the 20g on crank up the boost it will run great!
|
| Mon May 10, 2010 11:28 am |
|
 |
|
-red97rum-
Senior Member
Joined: Mon Aug 10, 2009 9:57 am Posts: 1077 Location: Ontario, CA [IE]
|
 Re: 20g
_________________-Dustin 1992 Tsi Auto Swapped 10.67@126mph
|
| Mon May 10, 2010 11:35 am |
|
 |
|
-red97rum-
Senior Member
Joined: Mon Aug 10, 2009 9:57 am Posts: 1077 Location: Ontario, CA [IE]
|
 Re: 20g
_________________-Dustin 1992 Tsi Auto Swapped 10.67@126mph
|
| Mon May 10, 2010 11:35 am |
|
 |
|
brendon97
DSM Regular
Joined: Tue Apr 06, 2010 9:53 pm Posts: 83
|
 Re: 20g
hell yah why not let me drain the oil out of the motor to while i turn up that boost
|
| Mon May 10, 2010 11:48 am |
|
 |
|
SOADweskey
No More 2.3L
Joined: Tue May 22, 2007 7:36 pm Posts: 4412 Location: Jacksonville, FL
|
 Re: 20g
_________________ Boost Creep is your turbo's way of calling you a little bitch for not running enough boost.
452 AWHP 446 lb ft of torque e85 FTW!!
"They are cool manly men now those DSM owners. Before it was just pasty white nerds, metro hair Asian kids and fruit pickers. They do real car club stuff and everything. Sometimes they even spend money here :-/"
-Mike W
|
| Mon May 10, 2010 11:54 am |
|
 |
|
brendon97
DSM Regular
Joined: Tue Apr 06, 2010 9:53 pm Posts: 83
|
 Re: 20g
ok say that then i have told you im new at this so instead of saying funny shit say throw a differnt turbo on that will handel the stock iternals and im sure you can make this benifit someone like hey i have a ? turbo that will give you a lil more power and ill trade you for you 20g insted of me getting a stock turbo and letting a 20g sit sround for a coupe months which i know is dum couse most of you probibly have somethin better then a 20g if people think im getting pissy im not im simply be a smart ass back and learning a lot at the same time. when people say go buy a book i thout that was the purpose of this wesite because on hand experince with someone is somethims better then reading a book that tells you this is one way to do this
|
| Mon May 10, 2010 12:08 pm |
|
 |
|
Black_gst
Death to Head Gaskets!
Joined: Tue Jan 27, 2009 10:38 am Posts: 1979
|
 Re: 20g
this website is to help each other out but we all hope and pretty much expect people to have a certain amout of basic knowledge.
aperently you posted a thread about your WG code problem and you didnt listen to peoples advice and went and bought a turbo that can and will blow up your motor, and you thought that it would fix your problem.
it seems that you dont have alot of the basics down that are required when you start modding a car like a DSM, these cars are alot more complex then any non turbo car and they are vey picky.
you should always attack everything one problem at a time and never try to fix a bunch of things at once and definatly do not put a 20g on a otherwise stock car. running a 16g one an otherwise stock car is not even a good idea but it is possible.
GL
|
| Mon May 10, 2010 12:38 pm |
|
 |
|
brendon97
DSM Regular
Joined: Tue Apr 06, 2010 9:53 pm Posts: 83
|
 Re: 20g
thank you i do have a lil bit of knowledge of these things im know clamimg i know a lot but i saw the turbo on the car and when i bought the new one it was the same size now i knew the turbo on it wasnt stock and the one i got was cheep so i thought it wasnt that big of a turbo but now i learned it is a big deal even though its no garret ballbearing
|
| Mon May 10, 2010 1:05 pm |
|
 |
|
christ
Goderator
Joined: Mon Jan 01, 1979 5:00 am Posts: 5739 Location: D-Town
|
 Re: 20g
_________________ it is physically impossible to open your mouth and tilt your head back and forth at the same time.
|
| Mon May 10, 2010 1:22 pm |
|
 |
|
Black_gst
Death to Head Gaskets!
Joined: Tue Jan 27, 2009 10:38 am Posts: 1979
|
 Re: 20g
^ the nicest comment ever left by Christ 
|
| Mon May 10, 2010 1:37 pm |
|
 |
|
Tsi_AWD_Talon
DSM Post Whore
Joined: Tue Jun 09, 2009 11:04 am Posts: 869 Location: San Fernando Valley
|
 Re: 20g
my buddy thought a 20g was a good idea too. He went out and got one, threw it on (no supporting mods) the stock lower heatshield on the turbo didnt fi back on, so he ran it with out one. He drove out to fontana from the valley. Turbo got so hot that the fadiator fans, wiring, and basically anything under the hood melted. The car over heated and to motor took a shit. He had to cut his losses and move on. Guess what? he doesnt want a 2g on his new GSX.
_________________ 
|
| Mon May 10, 2010 1:47 pm |
|
 |
|
Illeagle
Talon of Doom
Joined: Wed May 23, 2007 10:07 am Posts: 3615 Location: Long Beach
|
 Re: 20g
... im going to stay out of this thread. There is soo much I can say.
_________________1/4 ET-11.657@121.18mph w/ 1.682 60' 445whp/427tq on RRE Dyno All on 91 pump. Do you need your car tooned? Got some extra cash? PM me for details. I offer street and dyno tunes
|
| Mon May 10, 2010 1:48 pm |
|
 |
|
brendon97
DSM Regular
Joined: Tue Apr 06, 2010 9:53 pm Posts: 83
|
 Re: 20g
ok thank you everyone for the input it helped now i know i have to get a differnt turbo. after i read up on things and figure out some stuff i will ask the real questions that wont waste your time i appreciate the input it has helped me not make a huge mistake by wasteing time and money. know do you all think i should just buy a stock turbo and put that on.
|
| Mon May 10, 2010 1:56 pm |
|
 |
|
Tsi_AWD_Talon
DSM Post Whore
Joined: Tue Jun 09, 2009 11:04 am Posts: 869 Location: San Fernando Valley
|
 Re: 20g
go with a 16g it makes good power and theres plenty of ppl out there who use it or have used it with good results.
_________________ 
|
| Mon May 10, 2010 2:35 pm |
|
|