Author |
Message |
DSM99
Moderator
Joined: Fri May 25, 2007 11:51 am Posts: 3373 Location: The Bat-Cave
|
1st day with Ecmlink v3
Spent ALL day/night/morinng at RRE with sam so he can dial in my car good. We did some street tuning and a lot of dyno tuning. Over all very impressed with the out come. The engine sounds very healty, no smoking, no leaks, no missfiring, no knock. Started off slow with 11psi. kept turing up the boost little by little. Sam solved a little fuel issue i had And Ended the night or moring i should say with 332AWHP and 290ish torque. at about 22PSI. 20G on 91 0ctane. No vtak sause/NOS sause, or caprisun fluid. Good looking out for sam and edgar for being there all damn day but im sure it was worth the wait Maybe sam can post the dyno sheets when he wakes up.
|
Sat Mar 06, 2010 11:12 am |
|
|
SOADweskey
No More 2.3L
Joined: Tue May 22, 2007 7:36 pm Posts: 4412 Location: Jacksonville, FL
|
Re: 1st day with Ecmlink v3
Good stuff man. We need to hook Sam up for all the effort he puts into our cars.
_________________ Boost Creep is your turbo's way of calling you a little bitch for not running enough boost.
452 AWHP 446 lb ft of torque e85 FTW!!
"They are cool manly men now those DSM owners. Before it was just pasty white nerds, metro hair Asian kids and fruit pickers. They do real car club stuff and everything. Sometimes they even spend money here :-/"
-Mike W
|
Sat Mar 06, 2010 11:25 am |
|
|
christ
Goderator
Joined: Mon Jan 01, 1979 5:00 am Posts: 5739 Location: D-Town
|
Re: 1st day with Ecmlink v3
_________________ it is physically impossible to open your mouth and tilt your head back and forth at the same time.
|
Sat Mar 06, 2010 12:13 pm |
|
|
SOADweskey
No More 2.3L
Joined: Tue May 22, 2007 7:36 pm Posts: 4412 Location: Jacksonville, FL
|
Re: 1st day with Ecmlink v3
I do, but I mean we need to like take him out and get him drinks all night or something on top of normal compensation.
_________________ Boost Creep is your turbo's way of calling you a little bitch for not running enough boost.
452 AWHP 446 lb ft of torque e85 FTW!!
"They are cool manly men now those DSM owners. Before it was just pasty white nerds, metro hair Asian kids and fruit pickers. They do real car club stuff and everything. Sometimes they even spend money here :-/"
-Mike W
|
Sat Mar 06, 2010 12:49 pm |
|
|
amskater
Official Photographer
Joined: Wed May 23, 2007 5:00 am Posts: 3726 Location: 626
|
Re: 1st day with Ecmlink v3
nice numbers Pollo, congrats
|
Sat Mar 06, 2010 1:44 pm |
|
|
clockworktoy
Squish Face
Joined: Tue May 22, 2007 7:08 pm Posts: 4327 Location: LBC
|
Re: 1st day with Ecmlink v3
Finally you get to up the boost and tune the car! Looking good man.
|
Sat Mar 06, 2010 3:31 pm |
|
|
Illeagle
Talon of Doom
Joined: Wed May 23, 2007 10:07 am Posts: 3615 Location: Long Beach
|
Re: 1st day with Ecmlink v3
Good morning. LOL just woke up like 10 minutes ago. Pollo's car runs great! No leaks, no phantom knock, everything rocks. I must say, good job with the build pollo, really clean and strong build. The fuel pump issue....wasn't your fault, he had some 1G style pump in the car, the whole time the car kept leaning out like it was topping out fuel pressure, you usually can tell because the car gets leaner as RPM rise, and you have to make stupid compensations at high RPM. MAF comp on his GM Maf was super bad ass, it was really consistent, I gotta let Thomas know about my input on his new GM cable. Kudos to previous owner who installed a shittier pump without fubar-ing the hard lines on the pump assemble, it looked literally untouched, but hacked away at the harness inside that plugs into the pump. Well, good job Eric, thanks to Edgar for hanging around and helping out where he could and helping make the car run solid, I'm sure he had a big hand in how the car ran great. But you gotta do sometime about that Honda shifting.
_________________1/4 ET-11.657@121.18mph w/ 1.682 60' 445whp/427tq on RRE Dyno All on 91 pump. Do you need your car tooned? Got some extra cash? PM me for details. I offer street and dyno tunes
|
Sat Mar 06, 2010 6:06 pm |
|
|
christ
Goderator
Joined: Mon Jan 01, 1979 5:00 am Posts: 5739 Location: D-Town
|
Re: 1st day with Ecmlink v3
_________________ it is physically impossible to open your mouth and tilt your head back and forth at the same time.
|
Sat Mar 06, 2010 6:49 pm |
|
|
DSM99
Moderator
Joined: Fri May 25, 2007 11:51 am Posts: 3373 Location: The Bat-Cave
|
Re: 1st day with Ecmlink v3
|
Sat Mar 06, 2010 7:22 pm |
|
|
DSMP
DSM Regular
Joined: Thu Nov 26, 2009 2:16 pm Posts: 95
|
Re: 1st day with Ecmlink v3
Nice job and well done. Time to see some graphs and logs!
|
Sun Mar 07, 2010 12:39 am |
|
|
DSM99
Moderator
Joined: Fri May 25, 2007 11:51 am Posts: 3373 Location: The Bat-Cave
|
Re: 1st day with Ecmlink v3
|
Sun Mar 07, 2010 4:41 am |
|
|
H8VTEC
Quagmire
Joined: Tue May 22, 2007 5:41 pm Posts: 2343 Location: Alhambra
|
Re: 1st day with Ecmlink v3
For the record...I never tuned the 20G on the dyno.
_________________ Never buy a car you can't push 12.8 @ 109.75mph
|
Sun Mar 07, 2010 1:09 pm |
|
|
DSM99
Moderator
Joined: Fri May 25, 2007 11:51 am Posts: 3373 Location: The Bat-Cave
|
Re: 1st day with Ecmlink v3
You shold of seen the coach, jumping and running around the dyno when I passed 310awhp
|
Sun Mar 07, 2010 1:18 pm |
|
|
Medrivfast
DSM Regular
Joined: Wed Apr 15, 2009 5:58 pm Posts: 192 Location: Thousand Oaks
|
Re: 1st day with Ecmlink v3
How many pounds a minute are you flowing?
_________________ 336 awhp 285 ft/lbs tq
|
Wed Mar 10, 2010 6:32 pm |
|
|
-red97rum-
Senior Member
Joined: Mon Aug 10, 2009 9:57 am Posts: 1077 Location: Ontario, CA [IE]
|
Re: 1st day with Ecmlink v3
Nice work man! I never got a chance to get my TDO6H 20g on the dyno before it died, but it was a such a FUN turbo.
_________________-Dustin 1992 Tsi Auto Swapped 10.67@126mph
|
Thu Mar 11, 2010 10:13 am |
|
|