| Author |
Message |
|
Bluesideup
DSM Regular
Joined: Sat May 30, 2009 5:41 pm
Posts: 55
|
 Re: ***JUNKYARD REPORTS*** Reviving an old but good thread.
Have any of you seen a 93-94 2.0 N/Ts at the Pick Your Part yards? I need a flywheel and clutch to finish my swap. And yes I realize the false economy of a used clutch but I'm building the car for the GRM $2009 Challenge race in August.
|
| Mon Jul 27, 2009 7:54 pm |
|
|
|
Bluesideup
DSM Regular
Joined: Sat May 30, 2009 5:41 pm
Posts: 55
|
Re: ***JUNKYARD REPORTS*** I hit the Anaheim and Stanton Pick Your Part yards yesterday
Anaheim
2 Black 1GB DOHC A/T Eclipses. One was pretty complete with interior and even the spark plug cover!
2 N/A 2GAs
Stanton
4 N/A 2GAs one even had the complete front bumper with foglights.
1 black and 1 light blue 1GB with a ridiculous boomerang wing, I wish I could post pics from my phone.
All of the 1Gs were A/T so I'm still in search of my flywheel.
|
| Thu Aug 06, 2009 10:11 am |
|
|
|
Bluesideup
DSM Regular
Joined: Sat May 30, 2009 5:41 pm
Posts: 55
|
Re: ***JUNKYARD REPORTS*** Went to the Wilmington Pick Your Part and they only had one DSM, a gray 92 N/A with a manual transmission. I was all excited until I discovered it was an early 92 with a 6 bolt.
Hit up Stanton too and there was a green 2G with some side skirt parts and what looked like new rear KYB GR-2 struts on the back.
Oh and Ecology in Wilmington didn't have jack.
Still looking for a 7 bolt N/A flywheel and clutch....
|
| Wed Aug 12, 2009 12:08 am |
|
|
|
clockworktoy
Squish Face
Joined: Tue May 22, 2007 7:08 pm
Posts: 4327
Location: LBC
|
Re: ***JUNKYARD REPORTS***
|
| Wed Aug 12, 2009 12:48 am |
|
|
|
Bluesideup
DSM Regular
Joined: Sat May 30, 2009 5:41 pm
Posts: 55
|
Re: ***JUNKYARD REPORTS*** Apparently the turbo FWD is too large for my bell housing. The AWD won't work for some reason although I know it is smaller than the FWD. The N/A flywheel is designed to be used with the 4G37 F5M22 trans shared by the Mirage and DSM.
This is some info I was sent....
Mitsubishi 1.8L 4G37 Tranny. Trannys Number is F5M22
The Diameter of the Flywheel is 11.25-ish In.
If yours matches then I'll take it if it's usable.
Or if anyone knows different please PM
|
| Wed Aug 12, 2009 9:49 am |
|
|
|
clockworktoy
Squish Face
Joined: Tue May 22, 2007 7:08 pm
Posts: 4327
Location: LBC
|
Re: ***JUNKYARD REPORTS*** Yeah I have. A turbo fwd from my old 7 bolt, so I do t think it will work
|
| Wed Aug 12, 2009 11:33 am |
|
|
|
Bluesideup
DSM Regular
Joined: Sat May 30, 2009 5:41 pm
Posts: 55
|
Re: ***JUNKYARD REPORTS*** Can you measure the diameter of your flywheel if you don't mind?
|
| Wed Aug 12, 2009 11:43 am |
|
|
|
clockworktoy
Squish Face
Joined: Tue May 22, 2007 7:08 pm
Posts: 4327
Location: LBC
|
Re: ***JUNKYARD REPORTS*** If I get a chance to do it today I'll post it up. If not I'll do it tomorrow
|
| Wed Aug 12, 2009 12:52 pm |
|
|
|
Bluesideup
DSM Regular
Joined: Sat May 30, 2009 5:41 pm
Posts: 55
|
Re: ***JUNKYARD REPORTS*** Thanks. I may end up buying new from autozone for $60 if I have to get it done today.
|
| Wed Aug 12, 2009 1:25 pm |
|
|
|
Bluesideup
DSM Regular
Joined: Sat May 30, 2009 5:41 pm
Posts: 55
|
Re: ***JUNKYARD REPORTS*** I ended up buying an Autozone flywheel. We'll see how it turns out. Thank you for your offer of help though.
|
| Wed Aug 12, 2009 10:01 pm |
|
|
|
Velocitysport31
DSM Regular
Joined: Thu Jul 23, 2009 1:33 am
Posts: 209
Location: Hesperia
|
Re: ***JUNKYARD REPORTS*** found a 1990 AWD up at the pick a part in Hesperia, ca... Its was unmolested tell i got there...lol there the head is rebuilt with 0 miles on it, and it has complete interior, body is near perfect, and has a good 14b on it still.
|
| Sat Aug 15, 2009 1:12 pm |
|
|
