ya i am taking it to some one els to get tuned.
thanx for all the help guys
[/code]
| ladsm.com http://www.ladsm.com/forum/ |
|
| safe boosting.????? http://www.ladsm.com/forum/viewtopic.php?f=7&t=5199 |
Page 1 of 2 |
| Author: | jeremy119 [ Mon Sep 01, 2008 1:54 pm ] |
| Post subject: | safe boosting.????? |
Im curantly rebuilding my 2g im putting wisco 9.0:1 pistons and egal rods in my stock sleave's, and im running a new evo3 16g turbo. ive had my head rebuilt and port polished. now my qestion is, wats a safe amount of boost to throw at it.? keeping in mind i still have to break it in.? |
|
| Author: | TalonatoR [ Mon Sep 01, 2008 2:04 pm ] |
| Post subject: | |
is this for a 420? 4g63's don't have sleeves it's a fully closed deck in the hefty cast iron block |
|
| Author: | res7bequ [ Mon Sep 01, 2008 2:10 pm ] |
| Post subject: | |
I'd probably just run the stock wastegate boost on 9:1s at least until I got it broken in. Just to play it safe. |
|
| Author: | jeremy119 [ Mon Sep 01, 2008 2:21 pm ] |
| Post subject: | |
its 4g63. and wats stock about 7psi? and i wanted to run about 15 after beakin is that safe? |
|
| Author: | TalonatoR [ Mon Sep 01, 2008 2:24 pm ] |
| Post subject: | |
| Author: | jeremy119 [ Mon Sep 01, 2008 2:31 pm ] |
| Post subject: | |
| Author: | christ [ Mon Sep 01, 2008 2:47 pm ] |
| Post subject: | |
| Author: | jeremy119 [ Mon Sep 01, 2008 2:54 pm ] |
| Post subject: | |
| Author: | jeremy119 [ Mon Sep 01, 2008 2:56 pm ] |
| Post subject: | |
| Author: | clockworktoy [ Mon Sep 01, 2008 3:12 pm ] |
| Post subject: | |
| Author: | twisted metal [ Mon Sep 01, 2008 3:27 pm ] |
| Post subject: | |
| Author: | res7bequ [ Mon Sep 01, 2008 5:25 pm ] |
| Post subject: | |
| Author: | ghetto_bird [ Mon Sep 01, 2008 6:42 pm ] |
| Post subject: | |
| Author: | res7bequ [ Mon Sep 01, 2008 7:19 pm ] |
| Post subject: | |
| Author: | jeremy119 [ Mon Sep 01, 2008 7:49 pm ] |
| Post subject: | |
ya i am taking it to some one els to get tuned. thanx for all the help guys [/code]
|
|
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|