| ladsm.com http://www.ladsm.com/forum/ |
|
| DIY WATER/METH INJECTION http://www.ladsm.com/forum/viewtopic.php?f=7&t=14603 |
Page 1 of 1 |
| Author: | LOLVTEC [ Tue Jul 17, 2012 7:19 pm ] |
| Post subject: | DIY WATER/METH INJECTION |
Going to go with water meth injection. planning on using my windshield wiper any inputs, as in 1. water pump 2. nozzle 3. solenoid (i heard it can be activated through link which i have) |
|
| Author: | turboawdfanatic [ Wed Jul 18, 2012 2:58 am ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
You can buy parts a la carte at Devil's Own injection. Use a Hobbs or similar brand pressure switch to actuate the meth, and use another one as a failsafe. |
|
| Author: | Illeagle [ Tue Jul 31, 2012 11:16 am ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
yup, devils own parts. What nozzle size depends on what turbo you are running. And yes, link can control Meth. |
|
| Author: | LOLVTEC [ Tue Aug 07, 2012 3:25 pm ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
Got devils own kit, what noozle should i use for my frank 5 turbo. It also came with a module to activate it. also how do i make methanol? Sent from my LG-P999 using Tapatalk 2 |
|
| Author: | LOLVTEC [ Wed Aug 08, 2012 12:47 pm ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
    im stumped on the wiring diagram. Obviously black is negative ground, The controller has its own ground as well as the pump. Now the pump has a positive that was tapped into the green wire on the controller, where the hell does that go? Im guessing positive since that will be the only positive source for the pump. Also i know i cant just put the positive to the battery I'm going to need a fuse or relay of some sort right? Sent from my LG-P999 using Tapatalk 2 |
|
| Author: | Illeagle [ Wed Aug 08, 2012 4:20 pm ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
If you are running link, you dont need that control box. On the pump, I run power from battery/fuse to pump power. On the ground side I run it to a relay then from the relay to ground and use the ECU FPS output controls to trigger the relay on and off when i want the meth to spray. Then on the pump itself there is a pressure switch on the top of the pump, I use that switch with the ECU's Idle switch pin to activate the meth maps so that it only switches to high boost and timing when there is pressure in the system. |
|
| Author: | LOLVTEC [ Wed Aug 08, 2012 6:22 pm ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
is there a write up for this, somewhere online? i have v3 lite only do i have to upgrade to full? Edit just read online i have to upgrade to full. Also what nozzle will i need?, I want to have all the parts ready so i can install it and have it tuned. edit found information but have no clue how to wire it. i need a meth install for dummies http://www.ecmtuning.com/wiki/nitrousco ... s=methanol looks like i have a devils own pump with a snow performance variable controller and the upgraded solenoid just in case of siphon effect during vacuum. |
|
| Author: | Illeagle [ Thu Aug 09, 2012 7:06 pm ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
 My gangster ass wiring diagram |
|
| Author: | LOLVTEC [ Fri Aug 10, 2012 1:10 am ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
holy shit thanks man. ill upgrade to v3 full and attempt to do wire it up. all i need is the nozzle size. and then you can tune it lol. |
|
| Author: | Illeagle [ Fri Aug 10, 2012 2:11 pm ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
nozzle size depends on turbo ur running |
|
| Author: | LOLVTEC [ Fri Aug 10, 2012 3:04 pm ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
The Turbo is a fp Frankenstein 5 Sent from my LG-P999 using Tapatalk 2 |
|
| Author: | slidesidwayz [ Sun Aug 12, 2012 8:00 am ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
They have a calculator on here that might help you. |
|
| Author: | LOLVTEC [ Sun Aug 12, 2012 8:27 am ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
The only thing that caught my eye on the link that you out was this  Sent from my LG-P999 using Tapatalk 2 |
|
| Author: | slidesidwayz [ Wed Feb 06, 2013 2:03 pm ] |
| Post subject: | Re: DIY WATER/METH INJECTION |
for future reference... |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|