| ladsm.com http://www.ladsm.com/forum/ |
|
| DSMlink OBD2 usb wire http://www.ladsm.com/forum/viewtopic.php?f=7&t=11823 |
Page 1 of 1 |
| Author: | ToxicRacing [ Tue Aug 31, 2010 3:53 am ] |
| Post subject: | DSMlink OBD2 usb wire |
Dose any one know if i have to get the ECMtuning obd2 usb wire or any obd2 usb would work the same or is there a difference?? thnx |
|
| Author: | Illeagle [ Tue Aug 31, 2010 11:53 am ] |
| Post subject: | Re: DSMlink OBD2 usb wire |
what version of DSMlink do you have? |
|
| Author: | ToxicRacing [ Tue Aug 31, 2010 4:46 pm ] |
| Post subject: | Re: DSMlink OBD2 usb wire |
The new one v3 like i used a regular wire and it wont work like its not installing the usb port when i turn the program on it only gives me com1 on the configure connection.... wut should i do? |
|
| Author: | Illeagle [ Tue Aug 31, 2010 7:36 pm ] |
| Post subject: | Re: DSMlink OBD2 usb wire |
You have to install the USB drivers first. http://www.ecmtuning.com/downloads/driv ... .04.06.zip The v3 cable has a Serial to USB adapter built into it. You need to use their drivers. The Link cable isnt a standard OBDII cable, its their own proprietary cable and only works with their flash chip and software. Are you going to be tuning the car yourself? |
|
| Author: | ToxicRacing [ Tue Aug 31, 2010 8:06 pm ] |
| Post subject: | Re: DSMlink OBD2 usb wire |
well i wanna learn but for now i dont need to tune i just wanna be able to tune it in a way so i can drive it to RRE after i install all my parts to tune it there... |
|
| Author: | Synthetek [ Tue Aug 31, 2010 8:58 pm ] |
| Post subject: | Re: DSMlink OBD2 usb wire |
Di you get dsmlink new or used? did it include a cable? |
|
| Author: | ToxicRacing [ Wed Sep 01, 2010 1:53 pm ] |
| Post subject: | Re: DSMlink OBD2 usb wire |
i downloaded the v3 program from the website.... isnt it the same? |
|
| Author: | Illeagle [ Wed Sep 01, 2010 1:55 pm ] |
| Post subject: | Re: DSMlink OBD2 usb wire |
V2 and V3 hardware is different. You can use the V3 software from either or, but the hardware is different. Did you buy your DSMlink new or used? <~answer that one. Its more than just the program on the website, its a chip that has to be soldered into your ECU, and a cable they make specificaly to work with that chip. |
|
| Author: | ToxicRacing [ Thu Sep 02, 2010 2:56 am ] |
| Post subject: | Re: DSMlink OBD2 usb wire |
thx for the help but i am selling my car now i am not ganna fix it up or anything any more cant afford to keep it anymore... |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|