Well I finally have everything I need for my conversion to be completed. Red 2gb FTMFW. I have the foglights bought them corey or luis whatever you guys call him. They dont have the brackets he told me you can mount them without the brackets on a 2ga. Can someone confirm this if not then i will just buy the brackets. I got them hooked up they turn on and everything. Just have no way of mounting them. Can someone help me out with this. Or better can someone post a picture of how the foglights mount on a stock 2gb.

That's what was trippin me out when he told me that. I know the brackets are a must to mount these. I have been looking for pics for about a hour now on how they bolt up but no luck yet. Tomorrow I dont work or have school so I will go threw junkyards and see if I can find them or pocket them hehe. Christ how did you mount your fogs on your RS.

RS and GS use a lot of the same parts meaning I have holes drilled, empty fuse trays and unused harnesses for things that aren't on my car. I just got a set of brackets and screwed them into the holes that are already on all Eclipse support bars. I did have to run my own wiring though but you should be good on yours since it came stock with fog lights. I'm not certain if the 2ga and 2gb fog light holes are in the same place but if not, a quick drill and tap on each side will have those brackets in place.

you should not need to drill any holes. my 2gb fogs bolted no prob on my 2ga. but my 2ga fog harness did not plug in the the 2gb fogs. Just cut off the connector and wired them