|
|
Register •
FAQ
• Search • Login
|
 |
|
Page 1 of 1
|
[ 9 posts ] |
|
| Author |
Message |
|
Sdsmracer99
DSM Regular
Joined: Sat Sep 13, 2008 5:48 pm
Posts: 260
Location: Norwalk, CA
|
 knocking engine =/ So my engine started knocking back in december. Havent driven it since.
i thought it was a broken valve or something but no the valves were ok.
i read to check the engine oil for metal shards and if that was the case then i spun a bearing, rod knock, or a walking crank.
well the oil checked out ok. no metal shrads whatsoever. so i am out of ideas as to what can be causing the knocking in my engine. can it be a busted lifter? i am out of ideas as to what to check....
|
| Sat Feb 14, 2009 4:26 pm |
 
|
|
|
SOADweskey
No More 2.3L
Joined: Tue May 22, 2007 7:36 pm
Posts: 4412
Location: Jacksonville, FL
|
Re: knocking engine =/ Lifter noise is very common from the 4G63 and without actually hearing and seeing the engine in person it is hard to say. Jerry's car sounded pretty horrible when he snapped his crank in half. But you may have seen metal in the oil if that was the case for you.
_________________
Boost Creep is your turbo's way of calling you a little bitch for not running enough boost.
452 AWHP 446 lb ft of torque e85 FTW!!
"They are cool manly men now those DSM owners. Before it was just pasty white nerds, metro hair Asian kids and fruit pickers. They do real car club stuff and everything. Sometimes they even spend money here :-/"
-Mike W
|
| Sat Feb 14, 2009 4:56 pm |
|
|
|
clockworktoy
Squish Face
Joined: Tue May 22, 2007 7:08 pm
Posts: 4327
Location: LBC
|
Re: knocking engine =/ Pull the oil pan for further inspection of the bottom end. When my 2nd motor walked no shards came out with the oil, then once i removed the pan i saw they were all stuck to the bottom of the pan.
|
| Sat Feb 14, 2009 5:03 pm |
|
|
|
H8VTEC
Quagmire
Joined: Tue May 22, 2007 5:41 pm
Posts: 2343
Location: Alhambra
|
Re: knocking engine =/ Or cut your oil filter in half with some tin snips and see if there are metal shavings in there.
_________________
Never buy a car you can't push
12.8 @ 109.75mph
|
| Sat Feb 14, 2009 5:41 pm |
|
|
|
BoostFrenzy
Senior Member
Joined: Fri Aug 31, 2007 12:56 am
Posts: 703
Location: West L.A.
|
Re: knocking engine =/
_________________
Nick: 2010 Evo GSR
|
| Sat Feb 14, 2009 8:45 pm |
|
|
|
Sdsmracer99
DSM Regular
Joined: Sat Sep 13, 2008 5:48 pm
Posts: 260
Location: Norwalk, CA
|
Re: knocking engine =/ imma try cutting the oil filter. if nothing there. i guess imma try to drop the oil pan. but i am just hoping its a broken lifter.... i really am hoping its that cuz i got no moneis to replace the engine wit a 6 bolt 4G63 right now.
|
| Sat Feb 14, 2009 8:59 pm |
|
|
|
Illeagle
Talon of Doom
Joined: Wed May 23, 2007 10:07 am
Posts: 3615
Location: Long Beach
|
Re: knocking engine =/ make sure its th original filter since it started knocking. You most likely will find it in there than in the pan, thats the filter doing its job.
_________________1/4 ET-11.657@121.18mph w/ 1.682 60' 445whp/427tq on RRE Dyno All on 91 pump. Do you need your car tooned? Got some extra cash? PM me for details. I offer street and dyno tunes
|
| Sun Feb 15, 2009 3:03 pm |
|
|
|
Sdsmracer99
DSM Regular
Joined: Sat Sep 13, 2008 5:48 pm
Posts: 260
Location: Norwalk, CA
|
Re: knocking engine =/
|
| Sun Feb 15, 2009 8:44 pm |
|
|
|
Sdsmracer99
DSM Regular
Joined: Sat Sep 13, 2008 5:48 pm
Posts: 260
Location: Norwalk, CA
|
Re: knocking engine =/ UPDATE: So there was metal shavings in the oil filter.  What r my options??
|
| Sat Feb 28, 2009 5:13 pm |
|
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 3 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
|
|
 |
|
