| ladsm.com http://www.ladsm.com/forum/ |
|
| 2g head, 1g bottom end http://www.ladsm.com/forum/viewtopic.php?f=5&t=4495 |
Page 1 of 1 |
| Author: | GSXzeke [ Sun Jul 13, 2008 1:57 pm ] |
| Post subject: | 2g head, 1g bottom end |
| Author: | Synthetek [ Sun Jul 13, 2008 2:02 pm ] |
| Post subject: | |
| Author: | dsmluv96 [ Sun Jul 13, 2008 2:50 pm ] |
| Post subject: | |
| Author: | clockworktoy [ Sun Jul 13, 2008 3:59 pm ] |
| Post subject: | |
You need to drill out the holes 1mm bigger, buy or make a harness for the 1g CAS, and use the 1g thermostat housing/waterpipe. You will also need a 1g intake manifold with your 2g sensors on there and if your still using your emissions stuff figure out what to do about your MDP sensor. I think thats about it but there might be a few things i forgot to mention. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|