| ladsm.com http://www.ladsm.com/forum/ |
|
| 16g install http://www.ladsm.com/forum/viewtopic.php?f=5&t=409 |
Page 1 of 2 |
| Author: | 95talonawd [ Sun Jun 24, 2007 8:16 pm ] |
| Post subject: | 16g install |
Finally got done with my 16g install and now I dont know where to hook my mbc to, because my t25 had a nipple on the turbo but the 16g does not have one. The only nipple is on the wastegate. Anyone know where I should hook it to? Thanks in advance Winter |
|
| Author: | nataku80 [ Sun Jun 24, 2007 8:38 pm ] |
| Post subject: | |
hey you need to drill a hole on your j-pipe and put a nipple on it and that will be your source, i used this old vaccuum thingy i had and drilled a hole and got it to stayin with some jb weld, you just have to be creative and think of something |
|
| Author: | res7bequ [ Sun Jun 24, 2007 8:48 pm ] |
| Post subject: | |
whatever u end up doing remember to like triple zip tie it cuz if it comes loose ur screwed |
|
| Author: | Synthetek [ Sun Jun 24, 2007 8:49 pm ] |
| Post subject: | |
mine gose to a nipple on my rre lower intercooler pipe, chek you ic pipes & see if there is one there. some people t it off of the line that goes from the intake manifold to the bov. |
|
| Author: | res7bequ [ Sun Jun 24, 2007 8:52 pm ] |
| Post subject: | |
yea i use the line from Intake manifold to BOV just seems easier than haaving to drill and shit. |
|
| Author: | 95talonawd [ Sun Jun 24, 2007 8:58 pm ] |
| Post subject: | |
thanks guys i think i will just tee in from the intake mani. to the bov. thanks for the help |
|
| Author: | clockworktoy [ Sun Jun 24, 2007 9:02 pm ] |
| Post subject: | |
| Author: | res7bequ [ Sun Jun 24, 2007 9:33 pm ] |
| Post subject: | |
| Author: | clockworktoy [ Sun Jun 24, 2007 9:38 pm ] |
| Post subject: | |
| Author: | 88whitestarion [ Mon Jun 25, 2007 3:35 pm ] |
| Post subject: | |
| Author: | TalonatoR [ Mon Jun 25, 2007 6:23 pm ] |
| Post subject: | |
| Author: | Synthetek [ Mon Jun 25, 2007 6:41 pm ] |
| Post subject: | |
| Author: | clockworktoy [ Mon Jun 25, 2007 6:57 pm ] |
| Post subject: | |
| Author: | Erix [ Mon Jun 25, 2007 10:52 pm ] |
| Post subject: | |
| Author: | SOADweskey [ Tue Jun 26, 2007 6:32 am ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|