| ladsm.com http://www.ladsm.com/forum/ |
|
| rear camber http://www.ladsm.com/forum/viewtopic.php?f=5&t=2431 |
Page 1 of 2 |
| Author: | BOOST [ Sat Jan 12, 2008 11:10 am ] |
| Post subject: | rear camber |
| Author: | ghetto_bird [ Sat Jan 12, 2008 12:51 pm ] |
| Post subject: | |
| Author: | christ [ Sat Jan 12, 2008 12:55 pm ] |
| Post subject: | |
There you go, bitch. |
|
| Author: | BOOST [ Sat Jan 12, 2008 1:49 pm ] |
| Post subject: | |
| Author: | clockworktoy [ Sat Jan 12, 2008 2:33 pm ] |
| Post subject: | |
| Author: | BOOST [ Sat Jan 12, 2008 2:36 pm ] |
| Post subject: | |
| Author: | 88whitestarion [ Sat Jan 12, 2008 4:43 pm ] |
| Post subject: | |
| Author: | BOOST [ Sun Jan 13, 2008 11:40 am ] |
| Post subject: | |
| Author: | christ [ Sun Jan 13, 2008 11:47 am ] |
| Post subject: | |
Learn how to use a leveler. Come on guy, we can't always hold your hand. You gotta explore this stuff by yourself sometimes. Throw on a couple washer and see what angle it changes it. Put enough on their so it has a slight negative angle. |
|
| Author: | dsmpurist [ Sun Jan 13, 2008 11:54 am ] |
| Post subject: | |
I had four thick washers on each bolt on a 2 inch drop. Then took it to Alignment. Then no more negative camber. Hope that helps. |
|
| Author: | RiG [ Sun Jan 13, 2008 4:12 pm ] |
| Post subject: | |
| Author: | Chamuko [ Sun Jan 13, 2008 4:26 pm ] |
| Post subject: | |
| Author: | 88whitestarion [ Sun Jan 13, 2008 5:13 pm ] |
| Post subject: | |
| Author: | bras_33 [ Mon Jan 14, 2008 4:59 pm ] |
| Post subject: | |
| Author: | GS420a [ Fri Jan 18, 2008 4:10 pm ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|