this was the other end of my harness
| ladsm.com http://www.ladsm.com/forum/ |
|
| need an engine hoist *cherry picker http://www.ladsm.com/forum/viewtopic.php?f=5&t=14993 |
Page 2 of 2 |
| Author: | charleslester08 [ Thu Jan 17, 2013 9:05 am ] |
| Post subject: | Re: need an engine hoist *cherry picker |
| Author: | -red97rum- [ Thu Jan 17, 2013 9:55 am ] |
| Post subject: | Re: need an engine hoist *cherry picker |
| Author: | charleslester08 [ Fri Jan 18, 2013 12:01 pm ] |
| Post subject: | Re: need an engine hoist *cherry picker |
| this was the other end of my harness |
|
| Author: | charleslester08 [ Fri Jan 18, 2013 12:05 pm ] |
| Post subject: | Re: need an engine hoist *cherry picker |
 This one was from my previous manifold, this is where it should be connecting, but i didn't have it on the engine i swapped it on, i notice there was 2 extra tubing behind the manifold near the firewall, are the manifolds set up differently? i pulled the engine of a 97 gst. i have a 99 gst. |
|
| Author: | str8bsting [ Fri Jan 18, 2013 12:08 pm ] |
| Post subject: | Re: need an engine hoist *cherry picker |
What color are the wires on the plug? |
|
| Author: | charleslester08 [ Fri Jan 18, 2013 1:04 pm ] |
| Post subject: | Re: need an engine hoist *cherry picker |
| Author: | Synthetek [ Fri Jan 18, 2013 1:36 pm ] |
| Post subject: | Re: need an engine hoist *cherry picker |
That's the Evap purge solenoid, its just smog stuff it might cause a cel but shouldn't prevent your car from starting. |
|
| Author: | charleslester08 [ Sun Jan 20, 2013 9:01 am ] |
| Post subject: | Re: need an engine hoist *cherry picker |
Previous owner was running dsm link on his car, so the firing order was different, started right up! Car finally started after all those years! Thanks for the help everyone! |
|
| Page 2 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|