Does anyone know how to remove a end clutch so i can replace it.

It's pretty simple, you can even do it with the tranny still in the car.

Here's IPT's tutorial vid:

i saw the video but i dont know where its located and what tools il need you know?

Yeah, all you need is a 10mm or 12mm socket. Snap ring pliers, needle nose pliers, flat head screw driver(s) and a couple c-clamps. Then you pretty much just need to follow the IPT video.

And of course the end clutch kit:
http://www.importperformancetrans.com/c ... -1671.html

The circled area is the housing you need to take off to get to the end clutches out:

thanks man this will be my first time doing something like this lol

That's cool, I've done it on mine and it's not too bad. Just make sure you follow the video and put the seals in correctly. The hardest part is compressing the return spring using C-Clamps to get to snap ring back on. And remember to soak the clutch disks in auto tranny fluid for at least 30 min before you put it back together.

does the kit come with all the fluids and lub?

It does not come with fluids or lube.

Nah, it only comes with the clutches & seals. You can get the tranny fluid at Oreily's. I use Valvoline ATF+4 full synthetic with about 3/4 of a bottle of "lubegard" black. The tranny shifts great with this combo in my experience.

so you drain the tranny fluid first right?