|
|
Register •
FAQ
• Search • Login
|
 |
|
Page 1 of 1
|
[ 5 posts ] |
|
| Author |
Message |
|
LegionGS
DSM Regular
Joined: Sat Jan 26, 2008 2:10 am
Posts: 197
Location: Downey, CA
|
 fuel hose question hi guys, yesterday I changed the fuel pump of my 1995 GS, I'm mad right now because I couldn't attach back one the hoses connected to the fuel plate, its quite difficult because as you turn it, the whole line turns back and the metal part that is on the top of the assembly feels like it will snap off soon. I have some pics, if someone did this job. How did u do it 
_________________
єяиιє
Chrysler 2.0 Liter Dual Overhead Cam (DOHC) 420A
|
| Tue Jan 10, 2012 1:02 pm |
|
|
|
christ
Goderator
Joined: Mon Jan 01, 1979 5:00 am
Posts: 5739
Location: D-Town
|
Re: fuel hose question Disconnect that hose from underneath the car first, then the hose will spin freely as you disconnect it from the top. Also, use flare/line wrenches so you don't strip the crap out of the nuts.
Alternatively, you could tin snip the sheet metal far enough back directly above the hose, peel it back and lift the entire assembly out without disconnecting it. Hammer it back down after you're done, but this way leads to a better chance and bending your fuel gauge mechanism if you're not careful.
_________________
it is physically impossible to open your mouth and tilt your head back and forth at the same time.
|
| Tue Jan 10, 2012 1:12 pm |
|
|
|
LegionGS
DSM Regular
Joined: Sat Jan 26, 2008 2:10 am
Posts: 197
Location: Downey, CA
|
Re: fuel hose question I think Im gonna take it out from underneath, it's stuck tho :/ maybe if I put some HD-14 will be losen, thank you for the tip
_________________
єяиιє
Chrysler 2.0 Liter Dual Overhead Cam (DOHC) 420A
|
| Tue Jan 10, 2012 1:22 pm |
|
|
|
christ
Goderator
Joined: Mon Jan 01, 1979 5:00 am
Posts: 5739
Location: D-Town
|
Re: fuel hose question Don't forget the special wrenches.
_________________
it is physically impossible to open your mouth and tilt your head back and forth at the same time.
|
| Tue Jan 10, 2012 1:24 pm |
|
|
|
LegionGS
DSM Regular
Joined: Sat Jan 26, 2008 2:10 am
Posts: 197
Location: Downey, CA
|
Re: fuel hose question yeah thank u bro
_________________
єяиιє
Chrysler 2.0 Liter Dual Overhead Cam (DOHC) 420A
|
| Tue Jan 10, 2012 1:52 pm |
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 37 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
|
|
 |
|
