|
Register •
FAQ
• Search • Login
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Author |
Message |
kingcoyote
DSM Regular
Joined: Tue Mar 30, 2010 10:06 am Posts: 108 Location: Long Beach
|
6 bolt swap not starting
My friend who did my six bolt swap is having trouble getting it started. There's spark but no injector pulse;it started with starting fluid in the cylinders. He went through the troubleshooting guide for no start and tested the resistor packs. When the key is turned on the CEL doesn't come on but the 20amp motor fuse under the hood is good and pin 92 on the ecu has continuity to where its supposed to. CAS was swapped w a known good one from my brothers car to be sure it wasn't that.
Anyone interested in taking a look at it ? I can pay and get food, were just at a dead end
|
Fri Dec 30, 2011 10:51 pm |
|
|
BOOST
Senior Member
Joined: Wed May 23, 2007 3:51 pm Posts: 2189 Location: L.A.
|
Re: 6 bolt swap not starting
have you tried swapping ecu's? the fact that the CEL doesn't turn on makes me think the ecu isn't getting power...
|
Sat Dec 31, 2011 1:01 am |
|
|
kingcoyote
DSM Regular
Joined: Tue Mar 30, 2010 10:06 am Posts: 108 Location: Long Beach
|
Re: 6 bolt swap not starting
I haven't. My only spare ecu is bad and I've got 950s so I'm not sure a stock ecu will keep it running but if I had one and the ecu was the problem maybe it'd start for a moment. I'm way over my head though.
The troubleshooting guide said no ce;l on start indicates blown motor fuse or bad ecu ground sensor but neither is the case.
|
Sat Dec 31, 2011 2:12 am |
|
|
kingcoyote
DSM Regular
Joined: Tue Mar 30, 2010 10:06 am Posts: 108 Location: Long Beach
|
Re: 6 bolt swap not starting
Yup it was the ECU.
|
Sun Jan 01, 2012 9:16 pm |
|
|
BOOST
Senior Member
Joined: Wed May 23, 2007 3:51 pm Posts: 2189 Location: L.A.
|
Re: 6 bolt swap not starting
Glad you found out the problem
|
Tue Jan 03, 2012 9:10 pm |
|
|
Erix
Senior Member
Joined: Tue May 22, 2007 7:10 pm Posts: 4767 Location: 818
|
Re: 6 bolt swap not starting
Word.
_________________ Current: '97 GS-T Spyder Past: '90 2.0L GS Turbo, '98 GS-T Spyder, '90 1.8L GS
|
Wed Jan 04, 2012 10:00 am |
|
|
kingcoyote
DSM Regular
Joined: Tue Mar 30, 2010 10:06 am Posts: 108 Location: Long Beach
|
Re: 6 bolt swap not starting
Thanks for the support, guys. I sent the ECU into ecm tuning so maybe by this time next week I'll be driving around and ready to get the tune touched up.
|
Wed Jan 04, 2012 12:18 pm |
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 5 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum
|
|
|
|