line wrench, pair of cahones.
| ladsm.com http://www.ladsm.com/forum/ |
|
| Feed line coming off oil pump... http://www.ladsm.com/forum/viewtopic.php?f=5&t=13681 |
Page 1 of 1 |
| Author: | TSIFZone [ Thu Dec 01, 2011 4:11 pm ] |
| Post subject: | Feed line coming off oil pump... |
is there any tool im missing or need to easily take this line off? its a big nut little nut combo... i feel like im going to snap the line before i loosen them |
|
| Author: | Illeagle [ Thu Dec 01, 2011 10:51 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
line wrench, pair of cahones.
|
|
| Author: | LeoDrive [ Thu Dec 01, 2011 11:25 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
...and some wd40 |
|
| Author: | TSIFZone [ Fri Dec 02, 2011 8:51 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
line wrench? like from home depot? |
|
| Author: | 4G63KING [ Fri Dec 02, 2011 9:06 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
i think he meant to line up the wrench and grow a pair and loosen the bi*c*. And use some lube like wd-40 or PB Blaster works better. |
|
| Author: | Wally [ Fri Dec 02, 2011 10:21 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
No an actual line wrench its a 5 sided wrench used for hard lines to prevent striping of the line. The normal 4 sided usually strips that line. It might be a b***c but it will come out. If is strips or snap you have an excuse to buy the SS oil feed line
|
|
| Author: | Illeagle [ Sat Dec 03, 2011 12:12 am ] |
| Post subject: | Re: Feed line coming off oil pump... |
|
|
| Author: | chinexican [ Sat Dec 03, 2011 8:07 am ] |
| Post subject: | Re: Feed line coming off oil pump... |
The line wrench is also often referred to as the "crow-foot" wrench. As mentioned before, it greatly reduces the chances of stripping the nut at the end of your line. |
|
| Author: | 4G63KING [ Sat Dec 03, 2011 2:15 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
Funny how i have some of those tools, but i didnt know they were called that. You learn something new everyday. |
|
| Author: | -red97rum- [ Tue Dec 06, 2011 2:55 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
| Author: | Black_gst [ Tue Dec 06, 2011 3:29 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
| Author: | chinexican [ Tue Dec 06, 2011 6:06 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
i stand corrected. |
|
| Author: | Illeagle [ Tue Dec 06, 2011 7:36 pm ] |
| Post subject: | Re: Feed line coming off oil pump... |
Chisel/prybar/screwdriver/weapon/stethoscope  Most improperly used tool. |
|
| Author: | Black_gst [ Wed Dec 07, 2011 7:54 am ] |
| Post subject: | Re: Feed line coming off oil pump... |
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|