| ladsm.com http://www.ladsm.com/forum/ |
|
| Went from Tokico hp's to kyb agx's. http://www.ladsm.com/forum/viewtopic.php?f=5&t=13400 |
Page 1 of 1 |
| Author: | 805dsmALEX [ Wed Oct 12, 2011 7:09 pm ] |
| Post subject: | Went from Tokico hp's to kyb agx's. |
Ok i Went from Tokico hp's to kyb agx's. I had the tokico's hp's on H&R race , the car went from no wheel gap at all were now it sits 1inch higher with the agx's.. Is it normal? I remember that my 1g laser was the same , higher in the front than in the rear. The tokicos arent shot just wanted some adjustable shocks. |
|
| Author: | Illeagle [ Thu Oct 13, 2011 7:56 am ] |
| Post subject: | Re: Went from Tokico hp's to kyb agx's. |
same springs still? |
|
| Author: | 805dsmALEX [ Thu Oct 13, 2011 9:20 am ] |
| Post subject: | Re: Went from Tokico hp's to kyb agx's. |
Yea , same springs. Front end sits 1" higher than with the HP's. |
|
| Author: | 805dsmALEX [ Mon Oct 17, 2011 1:58 pm ] |
| Post subject: | Re: Went from Tokico hp's to kyb agx's. |
Nvm... Fixed it.. |
|
| Author: | amskater [ Mon Oct 17, 2011 2:41 pm ] |
| Post subject: | Re: Went from Tokico hp's to kyb agx's. |
| Author: | 805dsmALEX [ Mon Oct 17, 2011 2:53 pm ] |
| Post subject: | Re: Went from Tokico hp's to kyb agx's. |
I trimmed the bushing that goes on the strut mount , the piece that rests on the dust cover. |
|
| Author: | Erix [ Wed Oct 19, 2011 12:14 pm ] |
| Post subject: | Re: Went from Tokico hp's to kyb agx's. |
^^^ which you should've done from the beginning |
|
| Author: | 805dsmALEX [ Wed Oct 19, 2011 1:01 pm ] |
| Post subject: | Re: Went from Tokico hp's to kyb agx's. |
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|