| ladsm.com http://www.ladsm.com/forum/ |
|
| spun bearing in cyl#4 http://www.ladsm.com/forum/viewtopic.php?f=5&t=12718 |
Page 1 of 1 |
| Author: | ElUnico718 [ Sun Apr 24, 2011 5:08 pm ] |
| Post subject: | spun bearing in cyl#4 |
so i finally found the REAL problem in my car, took the oil pan off and this is what fell right out  some metal shavings and some internal damage  Cyl#4  thinkin about doin the 6 bolt swap or just fix the current problem while im takin her apart, but im open to any suggestions if ya got better ideas |
|
| Author: | DSM99 [ Sun Apr 24, 2011 6:12 pm ] |
| Post subject: | Re: spun bearing in cyl#4 |
Welcome to the blown motor club. Yeah definetly do a 6bolt swap. Build it right, do a lot of research and ask questions for different opinions. Best thing I ever did was built a 6bolt motor. I did it 2years ago and never looked back. Been running good with rarely any problems at all. |
|
| Author: | christ [ Sun Apr 24, 2011 7:18 pm ] |
| Post subject: | Re: spun bearing in cyl#4 |
| Author: | DSM99 [ Sun Apr 24, 2011 8:51 pm ] |
| Post subject: | Re: spun bearing in cyl#4 |
It's driven daily to work...about 11k on the motor and with a good about off abuse on the streets. It has also seen the track a few times. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|