| ladsm.com http://www.ladsm.com/forum/ |
|
| 95 gsx CAS?? http://www.ladsm.com/forum/viewtopic.php?f=5&t=12628 |
Page 1 of 1 |
| Author: | deviousgst [ Sun Apr 03, 2011 6:03 pm ] |
| Post subject: | 95 gsx CAS?? |
i need some help and i tried searching but couldnt really find my answer. i just bought a 95 gsx 2days ago, drove 5hrs to get it drove it back w/o a problem. The next day i was driving it up and down the street, i decided to launch it, once i launched it and went to shift to 2nd it just died. now it wont start just keeps cranking and cranking. i checked for fuel and spark. im getting fuel but no spark. any ideas? i already swapped out the transistor and that didnt help, and right now im trying to figure out if my cas is bad but i dont know how to test it and i wanna swap that out. My question is do i have to take out the timing belt to unbolt the cas since its behind the intake cam gear? or whats the right way on doin it.? sorry for the long post, im just stumped Has anyone ever had this problem or do any of yall who own a 95 ever replace the cam angle sensor? if so how |
|
| Author: | Wally [ Sun Apr 03, 2011 6:47 pm ] |
| Post subject: | Re: 95 gsx CAS?? |
Yup timing belt needs to come off I did it on my old gsx. Your gonna need to remove the intake cam as well since held up by two bolts. |
|
| Author: | deviousgst [ Sun Apr 03, 2011 8:02 pm ] |
| Post subject: | Re: 95 gsx CAS?? |
Dam ittttttt....that's what I DIDN'T wanna do..what's the easiest way to check if the cas is good? And what other things should I check before replacing the cas. Basicaly what's th easiest things I can check first? I already checked fuses in th fuse box, transistor. |
|
| Author: | clockworktoy [ Mon Apr 04, 2011 12:27 am ] |
| Post subject: | Re: 95 gsx CAS?? |
throw on a 1g cas with cas swap harness (all plug in play in your case) and if the car starts most likely its a dead cas. |
|
| Author: | deviousgst [ Mon Apr 04, 2011 10:50 am ] |
| Post subject: | Re: 95 gsx CAS?? |
would i have to tap my intake cam? or is that just for 2g cas? how would i time it with a 1g CAS? |
|
| Author: | clockworktoy [ Tue Apr 12, 2011 9:35 pm ] |
| Post subject: | Re: 95 gsx CAS?? |
No you don't. Make sure all the timing marks on the motor are lined up and then line the knotches on the cam sensor together and slap it on. Its pretty easy to do, you just need to add 2 studs (holes already exist on the head) and bolt down the cam sensor. |
|
| Author: | deviousgst [ Sun Apr 17, 2011 8:06 pm ] |
| Post subject: | Re: 95 gsx CAS?? |
oops..sorry for not updating. i've put a 1g CAS on about more than a week ago. i just had to swap plug wires around and it started right up. i thought i'd had to swap injector pins out but it started first crank and idles good drives normal |
|
| Author: | christ [ Mon Apr 18, 2011 12:36 am ] |
| Post subject: | Re: 95 gsx CAS?? |
Good good. So you solved the problem. Good job man, have fun. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|