so i still havent bought spring and retainers, i found kelfords and cosworth but cosworth doesnt come with retainers and its still pretty pricy! So still undeceive
| ladsm.com http://www.ladsm.com/forum/ |
|
| spring and reatiners http://www.ladsm.com/forum/viewtopic.php?f=5&t=12573 |
Page 1 of 1 |
| Author: | whitegsx97 [ Mon Mar 21, 2011 4:45 pm ] |
| Post subject: | spring and reatiners |
So i ordered 272 kelfords for my gsx that has a 68hta turbo planning to do 29 or 30 psi depending on what sam thinks is good. So wanted to know what springs and retainers are good? Also what bov will work right for that much psi. Wodering if the type s will hold up if so, so i can buy a real one. |
|
| Author: | Havoc [ Mon Mar 21, 2011 5:19 pm ] |
| Post subject: | Re: spring and reatiners |
on pump? type s will work, especially if you use the diaphram off an rs |
|
| Author: | SOADweskey [ Mon Mar 21, 2011 7:26 pm ] |
| Post subject: | Re: spring and reatiners |
If you want to be ballin' like me you can run the synapse engineering bov. As for springs, BC's will work I have some with my FP4Rs and they are way bigger than those cams. There have been people having issues with them lately so if you want some that are proven awesome maybe Kiggly or FP. I hear good things about the Manly springs but have actually seen a set used in a DSM. |
|
| Author: | whitegsx97 [ Tue Mar 22, 2011 3:56 pm ] |
| Post subject: | Re: spring and reatiners |
no on e85, well for the spring and retainers i might jus go with the bcs, and also have a question i have a fp 255 fuel pump should i jus use it or buy a walbro 255? |
|
| Author: | SOADweskey [ Tue Mar 22, 2011 5:13 pm ] |
| Post subject: | Re: spring and reatiners |
As far as I know the FP pump is a walbro pump. If anything it might be a touch nicer. If you really want to buy a new pump check out this one, it flows a good bit more than the wally, it is still just drop in installed, and it is the only in tank pump that is designed for long term e85 use. |
|
| Author: | clockworktoy [ Tue Mar 22, 2011 11:19 pm ] |
| Post subject: | Re: spring and reatiners |
I'm not a fan of the BC springs, i would go with the kiggley beehives or the FP version. |
|
| Author: | whitegsx97 [ Fri Mar 25, 2011 8:17 pm ] |
| Post subject: | Re: spring and reatiners |
so i still havent bought spring and retainers, i found kelfords and cosworth but cosworth doesnt come with retainers and its still pretty pricy! So still undeceive
|
|
| Author: | 50trimanic [ Fri Mar 25, 2011 10:09 pm ] |
| Post subject: | Re: spring and reatiners |
The Evo 8-9 Springs would work I heard about someone pumping out almost 700hp on em ask Sam what he thinks...My friend bought the ferrea dual valve springs I post up later how they do....Plus someone told me they pushing 34 pds on the stock ones I had bad luck with the stocks 1g wouldnt let me pass 22 pds im running evo 9 springs Ill post later on how they do....... |
|
| Author: | whitegsx97 [ Sun Mar 27, 2011 7:13 pm ] |
| Post subject: | Re: spring and reatiners |
i bought kelfords beehive set so i should be good with those 
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|