|
|
Register •
FAQ
• Search • Login
|
 |
|
Page 1 of 1
|
[ 7 posts ] |
|
| Author |
Message |
|
Dloiphone
DSM Regular
Joined: Wed Jan 27, 2010 8:01 pm
Posts: 371
Location: OXnard 805
|
 BISS SCREW my biss screw is all worned out and stripped. anybody have had this problem, and have a suggestion to get it out? and where can i get a replacement for it as well? havent been able to find it
_________________
98 GSX-
98 GST-SOLD!!
|
| Wed Sep 08, 2010 7:28 pm |
|
|
|
Illeagle
Talon of Doom
Joined: Wed May 23, 2007 10:07 am
Posts: 3615
Location: Long Beach
|
Re: BISS SCREW OEM Mitsubishi
MD614948 -Screw Itself
MD608806 - O-ring for screw.
Drill with easy out can get it out pretty easy. Oil the new o-ring up a little before installing it. It should be set about 2 full turns from soft bottom when you put the new one in.
_________________1/4 ET-11.657@121.18mph w/ 1.682 60' 445whp/427tq on RRE Dyno All on 91 pump. Do you need your car tooned? Got some extra cash? PM me for details. I offer street and dyno tunes
|
| Wed Sep 08, 2010 7:31 pm |
|
|
|
Dloiphone
DSM Regular
Joined: Wed Jan 27, 2010 8:01 pm
Posts: 371
Location: OXnard 805
|
Re: BISS SCREW DAMN!! that was quick sam. Thanks!
In order to adjust the BISS screw do I really need a scan tool for this? I read some people just turn it while the car is idling but not sure if its a must to have though.
_________________
98 GSX-
98 GST-SOLD!!
|
| Wed Sep 08, 2010 7:33 pm |
|
|
|
Illeagle
Talon of Doom
Joined: Wed May 23, 2007 10:07 am
Posts: 3615
Location: Long Beach
|
Re: BISS SCREW No, the scan tool is to just lock the ISC to where you can adjust the BISS and the ISC wont compensate. But most cars after you get it down just right, its usually, 1.5~2 turns out from soft bottom. So with the car off, turn it all the way in till it stops, dont go really tight, just till it snuggly stops. Then turn it out 2 turns. Fire it up, let the car warm up and idle for like 5~7 minutes after its warm, its should be good.
_________________1/4 ET-11.657@121.18mph w/ 1.682 60' 445whp/427tq on RRE Dyno All on 91 pump. Do you need your car tooned? Got some extra cash? PM me for details. I offer street and dyno tunes
|
| Wed Sep 08, 2010 7:56 pm |
|
|
|
Dloiphone
DSM Regular
Joined: Wed Jan 27, 2010 8:01 pm
Posts: 371
Location: OXnard 805
|
Re: BISS SCREW after inspection, i noticed it does not have the BISS screw after all and it was filled in with something.
i called rre and ask for you sam, but i was told by robert you were busy working on a car. He suggested to just buy a new throttle body
_________________
98 GSX-
98 GST-SOLD!!
|
| Fri Sep 10, 2010 6:18 pm |
|
|
|
Wally
Senior Member
Joined: Wed Feb 18, 2009 1:59 pm
Posts: 2238
Location: Los Angeles 90006
|
Re: BISS SCREW
|
| Sat Sep 11, 2010 10:19 pm |
|
|
|
Dloiphone
DSM Regular
Joined: Wed Jan 27, 2010 8:01 pm
Posts: 371
Location: OXnard 805
|
Re: BISS SCREW
_________________
98 GSX-
98 GST-SOLD!!
|
| Sun Sep 12, 2010 10:53 am |
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 21 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
|
|
 |
|
