| ladsm.com http://www.ladsm.com/forum/ |
|
| 20g http://www.ladsm.com/forum/viewtopic.php?f=5&t=11271 |
Page 1 of 4 |
| Author: | brendon97 [ Sun May 09, 2010 7:59 pm ] |
| Post subject: | 20g |
ok so im in the process of puting a 20g turbo on my car i have a problem in my last post i was decideing to put on a fm with stock turbo. well now that i have a 20g would it be good to throw the fm on now it is a long route. i also have headers intake and 3 in exaust but i havent got a boost contoller yet. let me know what u think. thanks! |
|
| Author: | clockworktoy [ Sun May 09, 2010 8:02 pm ] |
| Post subject: | Re: 20g |
A 20g will heatsoak a stock SMIC quickly so yes it is now time to upgrade. Now, my question yo you is, why are you throwing on a 20g without a way to control boost and i bet stock fuel setup? |
|
| Author: | brendon97 [ Sun May 09, 2010 8:06 pm ] |
| Post subject: | Re: 20g |
the reason is because the stock waste gate was bad and insted of spendin 80 bucks on that i decide to wait and just get a better turbo and it was for a killer price. also yes i am running stock fuel system i plan on upgradeing it soon just haven made my mind on what to do. |
|
| Author: | clockworktoy [ Sun May 09, 2010 8:10 pm ] |
| Post subject: | Re: 20g |
LOL ahh 2g's |
|
| Author: | brendon97 [ Sun May 09, 2010 8:19 pm ] |
| Post subject: | Re: 20g |
ok! understand that the car isnt running its trowing waste gate codes so i put this turbo on thinking it could have been a small part of that reason, and i still cant get it to run somewhat decent. the car had a few issues when i bought it as aproject the tps sensor was bad, the throttle body gasket was bad, and the mas airflow was bad. and the dum fuck who did the motor swap on it forgot how the vac lines went to i have been trying to figure it out just to get it to idel for 2 min. any helpfull input would be nice. thanks! |
|
| Author: | SOADweskey [ Sun May 09, 2010 8:24 pm ] |
| Post subject: | Re: 20g |
I will be blunt with you. I hope you get your car working but if you do get it running and you have a 20G with the stock fuel system and no way to tune it proboscis won't run long before blowing up and sending a piston into the oil pan. You can't half ass the supporting mods when upgrading to a turbo that flows as much as a 20G. |
|
| Author: | brendon97 [ Sun May 09, 2010 8:36 pm ] |
| Post subject: | Re: 20g |
understand! and i figred that my ideah is to get it running just for now. i plan i buying a block within the next week or so and build a frash built motor to throw in there i just want it on the road already it is my only car blah blah blah! i want power and i want reliability> i know with power comes problems but if you have any info on how to build this new motor so it will be some what reliable let me know. i dont take affence to blunt statments or shit like that i understand that i am kinda new to this whole thing so any input is better then none. thanks! |
|
| Author: | clockworktoy [ Sun May 09, 2010 8:49 pm ] |
| Post subject: | Re: 20g |
Wastegate code means that the stock bcs isn't plugged in. So you basically spend i don't know how much money and time fixing a simple problem. If you want to build a motor then i would highly suggest taking it somewhere with people who know what they're doing. |
|
| Author: | Synthetek [ Sun May 09, 2010 8:51 pm ] |
| Post subject: | Re: 20g |
| Author: | brendon97 [ Sun May 09, 2010 8:57 pm ] |
| Post subject: | Re: 20g |
i perfer not to! there is no appreciation in paying someone to build me a motor. i just halped a buddy rebuild a 4g63 to stock specs. which isnt as hard. i just would like some input from others. like put forged rods or billlit rods, stroke it, what injectors would be best 550 or ? cause it is my dd for now. |
|
| Author: | brendon97 [ Sun May 09, 2010 8:58 pm ] |
| Post subject: | Re: 20g |
ok so how di i fix that! or do i just say o well its a supid fuckin code would buying a elec boost contooler fix that cause mine is pluged in |
|
| Author: | SOADweskey [ Sun May 09, 2010 9:41 pm ] |
| Post subject: | Re: 20g |
Check if your car still has a boost control solenoid and if it is plugged in. Check this article that references where to find the part . If you are going to buy bigger injectors and you want to build a serious motor don't waste your money on 550's. I would only buy 1000's or bigger but you will need something like ECMlink or an ECU re-flash to tune them. So it will be more money up front but save you money in the long run. |
|
| Author: | DSM99 [ Sun May 09, 2010 9:57 pm ] |
| Post subject: | Re: 20g |
nothin wrong with someone else building your motor for you. it needs to go to a machine shop who knows there shit. Us who have built motors with forged internals have done that. |
|
| Author: | christ [ Mon May 10, 2010 8:44 am ] |
| Post subject: | Re: 20g |
I see you spending a lot of money on your car in the future because you want to put down more power than your understanding of these cars permits. You don't fix CELs with bigger turbos and you don't build motors without supporting mods. Honestly friend, you need to step back and break open the books before you start doing big things to your car or it's not going to be a fun road. |
|
| Author: | ooljima [ Mon May 10, 2010 10:45 am ] |
| Post subject: | Re: 20g |
i vote to let him learn the way most of us did when we started. beginner's luck ...... or BOOM! |
|
| Page 1 of 4 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|