| ladsm.com http://www.ladsm.com/forum/ |
|
| Grinding noise during launch http://www.ladsm.com/forum/viewtopic.php?f=4&t=15127 |
Page 1 of 2 |
| Author: | slidesidwayz [ Mon Mar 11, 2013 9:37 pm ] |
| Post subject: | Grinding noise during launch |
My car makes a grinding noise during launches and also sometimes when going in reverse at a normal speed (like backing up into a parking space). Could that be the cv axles? I already ordered a new front set so they should be here any day now, but I wanted to know if that should fix the problem. |
|
| Author: | 4G63KING [ Tue Mar 12, 2013 4:06 pm ] |
| Post subject: | Re: Grinding noise during launch |
Is your clutch set up new? |
|
| Author: | slidesidwayz [ Tue Mar 12, 2013 8:31 pm ] |
| Post subject: | Re: Grinding noise during launch |
The clutch setup was just installed but the clutch has like 2000 miles on it. |
|
| Author: | slidesidwayz [ Wed Mar 13, 2013 1:13 pm ] |
| Post subject: | Re: Grinding noise during launch |
The car also makes a slight rattling sound during idle with my foot off the clutch.. When I push the clutch all the way in the rattling stops.. Any ideas what it could be? |
|
| Author: | BoostCreep [ Thu Mar 14, 2013 11:23 am ] |
| Post subject: | Re: Grinding noise during launch |
| Author: | slidesidwayz [ Thu Mar 14, 2013 12:26 pm ] |
| Post subject: | Re: Grinding noise during launch |
It is starting to grind when I drive in 1st gear or reverse.. (never when I switch into 1st but sometimes when I go into reverse..) The trans is a stage 2 shep with welded diff and an exedy stage 2 thick disc with fidanza flywheel.. Could it not be adjusted properly? Idk what the problem could be.. |
|
| Author: | 4G63KING [ Thu Mar 14, 2013 4:38 pm ] |
| Post subject: | Re: Grinding noise during launch |
Google what ur problem is and a lot of links of tuners will pop up. I'm having clutch issue to. After I replaced flywheel n clutch with new aem stuff. So I ordered a xtended rod but will not use it as I've read a lot about it, and it sys is no bueno is. Temp. Fix and will cause other issues. So I bought new slave n ordered new fork n ball etc |
|
| Author: | slidesidwayz [ Thu Mar 14, 2013 7:10 pm ] |
| Post subject: | Re: Grinding noise during launch |
Yeah I read them all already. Some say TOB, others say the trans is not bolted tight enough but the ones ive read only mention the noise during idle. None mention a loud grinding noise when launching as well. |
|
| Author: | awdmonster [ Mon Mar 18, 2013 3:27 pm ] |
| Post subject: | Re: Grinding noise during launch |
| Author: | stussyking [ Tue Mar 19, 2013 12:44 am ] |
| Post subject: | Re: Grinding noise during launch |
I thought TOB too, my old 240sx used to do that at the strip |
|
| Author: | slidesidwayz [ Fri Mar 22, 2013 8:32 am ] |
| Post subject: | Re: Grinding noise during launch |
* The noise occurs when my foot is off the clutch pedal **It has a brand new OEM tob |
|
| Author: | awdmonster [ Sat Mar 23, 2013 3:17 pm ] |
| Post subject: | Re: Grinding noise during launch |
Trow Bering or bad clutch. |
|
| Author: | slidesidwayz [ Sun Mar 24, 2013 3:34 pm ] |
| Post subject: | Re: Grinding noise during launch |
Would it be bad for the car to keep driving it with the current clutch/trans setup? |
|
| Author: | awdmonster [ Mon Mar 25, 2013 9:40 am ] |
| Post subject: | Re: Grinding noise during launch |
| Author: | slidesidwayz [ Mon Mar 25, 2013 4:01 pm ] |
| Post subject: | Re: Grinding noise during launch |
I didn't know if it would be bad or not and obviously I asked so that I wouldn't be stranded on the side of the road. I guess I should have assumed.. Thanks for your help awdmonster.. Anyway, the tob is brand new oem.. That would leave the clutch setup correct? |
|
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|