ladsm.com http://www.ladsm.com/forum/ |
|
timing marks http://www.ladsm.com/forum/viewtopic.php?f=4&t=14971 |
Page 1 of 1 |
Author: | Rigo91 [ Wed Dec 26, 2012 4:54 pm ] |
Post subject: | timing marks |
ok so I've been turning the crank over and over and over, and every time my timing on my cams r correct but the marks on the oil pump sprocket and crank don't line up here's a pic, can anyone help me on this? Sent from my iPhone using Tapatalk |
Author: | Synthetek [ Wed Dec 26, 2012 5:19 pm ] |
Post subject: | Re: timing marks |
You have to turn it 6 times before they line up. Have you eliminated your balance shaft? If you did then then you don't have to line up the oil pump sprocket. If you have already turned it 6 times and its still off than your timing is probably off and you need to re do it. |
Author: | Rigo91 [ Wed Dec 26, 2012 5:29 pm ] |
Post subject: | Re: timing marks |
ok then I guess I have to re-do my timing because it still won't line up after more than 6 turns, what about the crank sprocket? that won't line up either when my cams are lined up Sent from my iPhone using Tapatalk |
Author: | Synthetek [ Wed Dec 26, 2012 5:38 pm ] |
Post subject: | Re: timing marks |
Author: | Rigo91 [ Wed Dec 26, 2012 7:44 pm ] |
Post subject: | Re: timing marks |
alright man thanks guess I have to do the timing then Sent from my iPhone using Tapatalk |
Author: | LOLVTEC [ Thu Dec 27, 2012 8:45 am ] |
Post subject: | Re: timing marks |
How is your car still running? Your off by a good 4 teeth Sent from my LG-P999 using Tapatalk 2 |
Author: | Rigo91 [ Thu Dec 27, 2012 9:57 am ] |
Post subject: | Re: timing marks |
well when did it ran I would hear rattling when I'm just cruising it, but I thought it was just lifter tick but now I'm thinking if I'm off about 3-4 teeth marks, my valves are probably hitting the piston, It ran alright but I did notice power loss Sent from my iPhone using Tapatalk |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |