| ladsm.com http://www.ladsm.com/forum/ |
|
| 1ga talon center wing bracket http://www.ladsm.com/forum/viewtopic.php?f=4&t=14625 |
Page 1 of 1 |
| Author: | Rigo91 [ Mon Jul 23, 2012 4:01 pm ] |
| Post subject: | 1ga talon center wing bracket |
has anybody here had an issue with the brackets breaking off the wing if so did u end up fixing it and how? I was just thinking of crazy glueing it lol Sent from my iPhone using Tapatalk |
|
| Author: | turboawdfanatic [ Mon Jul 23, 2012 11:15 pm ] |
| Post subject: | Re: 1ga talon center wing bracket |
Never run into that. You can probably find a center wing piece at the junk yard pretty easily |
|
| Author: | dsmchevyguy [ Mon Jul 23, 2012 11:50 pm ] |
| Post subject: | Re: 1ga talon center wing bracket |
Post pics I ran into a problem similar but I don't know the damage to yours |
|
| Author: | LOLVTEC [ Tue Jul 24, 2012 8:45 am ] |
| Post subject: | Re: 1ga talon center wing bracket |
its called heavy duty double sided tape! that's how my wing is held on! |
|
| Author: | -red97rum- [ Tue Jul 24, 2012 9:09 am ] |
| Post subject: | Re: 1ga talon center wing bracket |
There's a few ways you can make it work. Go to home depot and pick up some aluminum strapping and cut it to the proper length. Then I'd either glue, silicone, double-side tape, zip tie, whatever, into the spot on the wing where the oem plastic mount usually goes. Then drill a hole and use a self tapping sheet metal screw to mount it. I've never actually tried this myself but I think you could get it work pretty well. ![]()
|
|
| Author: | Rigo91 [ Tue Jul 24, 2012 2:45 pm ] |
| Post subject: | 1ga talon center wing bracket |
it broke from where u screw it on to the wing luckly it was only one bracket ![]() ![]() ![]() Sent from my iPhone using Tapatalk |
|
| Author: | Rigo91 [ Tue Jul 24, 2012 3:02 pm ] |
| Post subject: | 1ga talon center wing bracket |
| Author: | LOLVTEC [ Tue Jul 24, 2012 3:25 pm ] |
| Post subject: | Re: 1ga talon center wing bracket |
go to a floral supply store, ask for stickem' its a heavy duty double sided tape that's water proof. be sure to clean the area where the contacts will be. it works it been holding my wing since my other one flew off the fwy. |
|
| Author: | -red97rum- [ Tue Jul 24, 2012 5:17 pm ] |
| Post subject: | Re: 1ga talon center wing bracket |
Oh ok, I was thinking you were talking about those little plastic square pieces that the bolts go through. Some really strong double-sided tape and/or some good epoxy would probably fix it right up. |
|
| Author: | Rigo91 [ Tue Jul 24, 2012 5:23 pm ] |
| Post subject: | 1ga talon center wing bracket |
alright for sure thanks a lot guys Sent from my iPhone using Tapatalk |
|
| Author: | Rigo91 [ Wed Jul 25, 2012 10:01 pm ] |
| Post subject: | 1ga talon center wing bracket |
fixed it, couldn't don't the tape u were talking about instead I got scotch heavy duty double sided tape and the wing it's attached pretty good, thanks again guys Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|