| ladsm.com http://www.ladsm.com/forum/ |
|
| Awdmonsters 1g build 2012 http://www.ladsm.com/forum/viewtopic.php?f=4&t=14507 |
Page 4 of 4 |
| Author: | awdmonster [ Mon Jul 14, 2014 12:21 am ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
Getting the cage fab'ed in It's still a mess I had to do some additional prep work for the 6x6 points |
|
| Author: | awdmonster [ Tue Jul 22, 2014 11:16 pm ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
Well here is an update got everything mocked with the help of my friend who fabs he maneged. To tuck the cage real tight. So far I'm like the result . With the intentions to add for a 10pt cage once I run faster than a 10.0 at 135 is the limit of the 6 pt I have Here are some pictures   
|
|
| Author: | awdmonster [ Mon Jan 12, 2015 10:28 pm ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
Got some new tires for the 1g honestly is the best mod I got for 2014 Managed to cut my 60ft down to the 1.55 range The slicks I got are the ET DRAGS MICKEY THOMPSON 24.5x8 for anyone who has a 5 speed and wants to drag race it and launch hard off the hole I highly recommend them Before you purchase them I would check for the roll out |
|
| Author: | awdmonster [ Mon Jan 12, 2015 10:30 pm ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
Also got some ARP wheel studs |
|
| Author: | LambdaJoker [ Tue Jan 13, 2015 7:21 am ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
Hitting 9's this year tank? |
|
| Author: | awdmonster [ Tue Jan 13, 2015 8:16 am ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
| Author: | -red97rum- [ Tue Jan 13, 2015 10:35 am ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
Looking good holmes! Fucking racecar status for sure 
|
|
| Author: | LambdaJoker [ Tue Jan 13, 2015 3:33 pm ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
At least your goals are realistic. So your goal is a better 60ft. Nice. And they say drag racing requires no skill. |
|
| Author: | awdmonster [ Tue Jan 13, 2015 9:42 pm ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
| Author: | LambdaJoker [ Wed Jan 14, 2015 11:38 am ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
Lol. Not my peeps. |
|
| Author: | awdmonster [ Wed Jan 14, 2015 9:40 pm ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
| Author: | awdmonster [ Sat Jun 27, 2015 9:44 pm ] |
| Post subject: | Re: Awdmonsters 1g build 2012 |
After 3 years of running the same setup its tile for a change going for a lighter plan weight reduction a new turbo new motor new everything New goal 9 sec |
|
| Page 4 of 4 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|