As you all know. I blew my car jan 15 at Fontana BOI There fore my car has been out of the road and back to my jack stands I took the time and did an outopsy on the car and made a list of new parts I wanted to run

Heres a list of parts I'm installing


Hx35 7blade T3 setup

-8 fuel feed from the pump to the fuel rail second inline walbro 255 in tank jays racing 345 LPH
1600cc

South bend clutch Kevlar ceramic combo with a new RRE flywheel


Hoosier QTP slicks

Full v3 Dsmlink instead of the lite v3

Tial BOV bigger IC race core new uicp taped for funny gas

Those are the upgrades now for the repairs

A rebuild head OS valves spring retainers the works still using my regrinds 272 from delta

Felpro composite gasket

A1 industries h11 head studs

Saturn alternator with relocation in the rear (jays racing kit )

When I checked out the damege the headgasket blew due to a lean condition
Thanks to an shitty stock Alternators not cranking 13.8 V it did 11v made to fuel pump drop presure
Causing lean condition and popped !
Plus , I made the mistake to install an MLS gasket with out the proper RA finish on the block so my car always pushed Coolant under boost 30psi

I will post pics of my ghetto hack jobs here pretty soon also hopefully you guys can learn something form my dumb mistakes
With this new setup hoping for 450~500 awhp who knows Dsms have a mind of there own
Pictures are coming soon

Frank the tank !



enjoy

pics or it didnt happen.

Thanks for Sam helping me

Update

Wire tuck
Dump tube
And a bunch of other things

Dyno coming soon

Oh yea also a 3582R

make it happen I want the see frank the tanks 1G vs that 1G that made 698 hp at MOD

Sam can you post my dyno graph

After all the hard work and Sam Fixing All my ghetto Rigs I made Thanks Sam
It was a Drama Free Dyno I was Really drunk at the dyno So ..... i could not drive for shit !!!


I will post more pics When the head was off and all other things I did to the car

This prob is the crapiest mos disorginized writeup but it works


this is on Tortilla Juice 29 psi 9.0:1 Samtunned !!
Lets not forget the beer I poured in to the coolant for good luck

Good work Frank!

Wavy torque graph .siiiiick though.congrats.

Your welcome Franky. That wave makes It fun and unpredictable Irv. LOL. Beers in the coolant is good luck. Current standing I have to check into a trans leak, thinking its an axle seal. Other than that, car runs beastly. Idles pefectly on 1600cc injectors at 950rpm. Good spool and good power band. This motor will rev to 8K easy and still have power up there.

killed any black z06's lately?

lol

NO NITRO LOL

Might need it to get that Z06

Do I smell another grudge match coming and a bull ride to follow???