ladsm.com http://www.ladsm.com/forum/ |
|
Awdmonsters 1g build 2012 http://www.ladsm.com/forum/viewtopic.php?f=4&t=14507 |
Page 1 of 4 |
Author: | awdmonster [ Tue Jun 12, 2012 11:46 pm ] |
Post subject: | Awdmonsters 1g build 2012 |
As you all know. I blew my car jan 15 at Fontana BOI There fore my car has been out of the road and back to my jack stands I took the time and did an outopsy on the car and made a list of new parts I wanted to run Heres a list of parts I'm installing Hx35 7blade T3 setup -8 fuel feed from the pump to the fuel rail second inline walbro 255 in tank jays racing 345 LPH 1600cc South bend clutch Kevlar ceramic combo with a new RRE flywheel Hoosier QTP slicks Full v3 Dsmlink instead of the lite v3 Tial BOV bigger IC race core new uicp taped for funny gas Those are the upgrades now for the repairs A rebuild head OS valves spring retainers the works still using my regrinds 272 from delta Felpro composite gasket A1 industries h11 head studs Saturn alternator with relocation in the rear (jays racing kit ) When I checked out the damege the headgasket blew due to a lean condition Thanks to an shitty stock Alternators not cranking 13.8 V it did 11v made to fuel pump drop presure Causing lean condition and popped ! Plus , I made the mistake to install an MLS gasket with out the proper RA finish on the block so my car always pushed Coolant under boost 30psi I will post pics of my ghetto hack jobs here pretty soon also hopefully you guys can learn something form my dumb mistakes With this new setup hoping for 450~500 awhp who knows Dsms have a mind of there own Pictures are coming soon Frank the tank ! enjoy |
Author: | Illeagle [ Thu Jun 14, 2012 3:22 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
pics or it didnt happen. |
Author: | awdmonster [ Wed Jul 25, 2012 3:47 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
Thanks for Sam helping me Update Wire tuck Dump tube And a bunch of other things Dyno coming soon Oh yea also a 3582R |
Author: | BertGST [ Wed Jul 25, 2012 3:53 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
make it happen I want the see frank the tanks 1G vs that 1G that made 698 hp at MOD |
Author: | awdmonster [ Sat Jul 28, 2012 6:37 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
Sam can you post my dyno graph |
Author: | turboawdfanatic [ Sun Jul 29, 2012 2:23 am ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
Author: | awdmonster [ Mon Jul 30, 2012 6:59 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
After all the hard work and Sam Fixing All my ghetto Rigs I made Thanks Sam It was a Drama Free Dyno I was Really drunk at the dyno So ..... i could not drive for shit !!! I will post more pics When the head was off and all other things I did to the car This prob is the crapiest mos disorginized writeup but it works this is on Tortilla Juice 29 psi 9.0:1 Samtunned !! Lets not forget the beer I poured in to the coolant for good luck |
Author: | turboawdfanatic [ Mon Jul 30, 2012 11:44 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
Good work Frank! |
Author: | Irv [ Tue Jul 31, 2012 8:58 am ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
Wavy torque graph .siiiiick though.congrats. |
Author: | Illeagle [ Tue Jul 31, 2012 11:43 am ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
Your welcome Franky. That wave makes It fun and unpredictable Irv. LOL. Beers in the coolant is good luck. Current standing I have to check into a trans leak, thinking its an axle seal. Other than that, car runs beastly. Idles pefectly on 1600cc injectors at 950rpm. Good spool and good power band. This motor will rev to 8K easy and still have power up there. |
Author: | DSM99 [ Thu Aug 02, 2012 4:50 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
killed any black z06's lately? |
Author: | Illeagle [ Thu Aug 02, 2012 5:13 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
lol |
Author: | awdmonster [ Thu Aug 02, 2012 7:04 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
NO NITRO LOL |
Author: | BertGST [ Thu Aug 02, 2012 8:43 pm ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
Might need it to get that Z06 |
Author: | Black_gst [ Fri Aug 03, 2012 10:01 am ] |
Post subject: | Re: Awdmonsters 1g build 2012 |
Do I smell another grudge match coming and a bull ride to follow??? |
Page 1 of 4 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |