| ladsm.com http://www.ladsm.com/forum/ |
|
| 1990 Vacuum delete (egr blockoff) http://www.ladsm.com/forum/viewtopic.php?f=4&t=13758 |
Page 1 of 1 |
| Author: | LOLVTEC [ Mon Dec 19, 2011 9:28 pm ] |
| Post subject: | 1990 Vacuum delete (egr blockoff) |
okay im ready to block off my egr because i know i have a vacuum leak along where the egr and evap is. i've looked all over the internet and can't find any write up on a 1990 vacuum delete. ive seen the taboo diagrams, most of the threads on tuners. i just want some clarification before i mess something up. 1. install block off plate. 2.1990 TB has four vacuum lines (2 at the top and 2 on the front side) I was just going to loop these set of two to each other. 3.those lines are originally connect to the thermostat housing so i'm guessing i would have to cap those lines to. (loop them) 4. there are four vacuum lines underneath the intake manifold (two of which were already capped off when i got the car. and the other two connects to the TB and Thermostat housing. so i will cap the remaining two. 5. i also want to remove my charcoal canister. i read up somewhere i only have to cap the line that goes to the tank. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|