ha I decoded my car and it as in the special price class
also here's what im trying to figure out and I just keep sounding retarded and making myself look like I dont know what i'm talking about.
| ladsm.com http://www.ladsm.com/forum/ |
|
| need opinions about my options http://www.ladsm.com/forum/viewtopic.php?f=4&t=13271 |
Page 1 of 3 |
| Author: | tarheels23 [ Fri Sep 16, 2011 4:24 pm ] |
| Post subject: | need opinions about my options |
I have a 1st gen talon tsi awd when I bought the car I wad dumb because I didn't know much and threw in the 2g maf one day and didn't know I was supposed to upgrade to 550's, safc, and fuel pump. And I've been running lean for a while and deciding on if im going to buy that stuff or go back and buy new air filter and recirc tube and go back to 1g maf Im trying to figure out if I can just get an safc and adjust the fuel and max out the 450'S/ or if I get 550's and safc do I have to upgrade the fuel pump? |
|
| Author: | 805dsmALEX [ Fri Sep 16, 2011 5:24 pm ] |
| Post subject: | Re: need opinions about my options |
Yes you have to upgrade the pump when you install the bigger injectors. Find a stock evo fuel pump or a walbro 190 . |
|
| Author: | clockworktoy [ Fri Sep 16, 2011 6:53 pm ] |
| Post subject: | Re: need opinions about my options |
Put it back to stock if you don't want to buy injectors. AFC's are garbage, if you're willing to spend money on that then buy dsmlink and injectors along with a pump. |
|
| Author: | tarheels23 [ Fri Sep 16, 2011 7:33 pm ] |
| Post subject: | Re: need opinions about my options |
Alright thanks guys |
|
| Author: | tarheels23 [ Sun Sep 18, 2011 9:33 pm ] |
| Post subject: | Re: need opinions about my options |
I didn't want to start a new thread so im trying to figure out what the casting number means on the thermostat housing on my head it says 6gs then under that it has a 7. Supposedly its an evo 3 head according to the kid i bought my car off of and just trying to get an answer because i cant find anything online about this. |
|
| Author: | Black_gst [ Mon Sep 19, 2011 7:03 am ] |
| Post subject: | Re: need opinions about my options |
even if is was an EvoIII head it wouldent matter, they are the same. |
|
| Author: | tarheels23 [ Mon Sep 19, 2011 8:31 am ] |
| Post subject: | Re: need opinions about my options |
but does anyone know if its a 6 or 7 bolt because I've looked online and can't seem to come up with the right keywords to find the info I'm looking fo. I know you can tell by casting on the left side next to the cams but there's nothing online about the numbers on the thermostat side |
|
| Author: | 805dsmALEX [ Mon Sep 19, 2011 9:16 am ] |
| Post subject: | Re: need opinions about my options |
They are 7bolts and the head is the same and if its a REAL EVO3 longblock , the only difference would be a slught bump Of compression, a short runner intake manifold bigger throttle body ,injectors,turbo. |
|
| Author: | Black_gst [ Mon Sep 19, 2011 9:17 am ] |
| Post subject: | Re: need opinions about my options |
http://www.vfaq.com/mods/early-late-engine.html http://www.dsmtuners.com/forums/newbie- ... -bolt.html also there is no such thing as a 6 bolt head, its a 1G head or a 2g head. The only variation is on a 1G head there are two versions. the early 1g's 90-92.5 had 6 bolt motors and the heads had larger through holes for the head bolts because the used 12mm head bolts. on the 92.5-99 they used 11mm head bolts so the through holes in the head are slightly smaller. another way to tell where the motor came from would be with the vin decoder http://vfaq.com/mods/VINs.html and if you cant decode it its likely a Evo III engine |
|
| Author: | tarheels23 [ Tue Sep 20, 2011 8:39 am ] |
| Post subject: | Re: need opinions about my options |
ha I decoded my car and it as in the special price class also here's what im trying to figure out and I just keep sounding retarded and making myself look like I dont know what i'm talking about.
|
|
| Author: | Black_gst [ Tue Sep 20, 2011 8:48 am ] |
| Post subject: | Re: need opinions about my options |
i think its just a batch number, it doesnt mean anything |
|
| Author: | clockworktoy [ Fri Sep 23, 2011 5:38 pm ] |
| Post subject: | Re: need opinions about my options |
That number doesn't mean anything, also you have an 89-90' 1g cam sensor. What's your question again? |
|
| Author: | tarheels23 [ Sat Sep 24, 2011 12:24 am ] |
| Post subject: | Re: need opinions about my options |
just trying to figure out what the cast number meant, cuz the kid that put it together was an idiot and Frankensteined the motor. I know its a first gen head but is it a turbo or non turbo head? because if it was a non turbo head then it wouldnt have an oil feed line for the turbo coming from the head, right? because there is one there |
|
| Author: | awdmonster [ Sat Sep 24, 2011 3:30 pm ] |
| Post subject: | Re: need opinions about my options |
| Author: | tarheels23 [ Sat Sep 24, 2011 10:04 pm ] |
| Post subject: | Re: need opinions about my options |
well my cars leaking oil somewhere inside the timing cover so next week i have to buy uv dye pour it in the oil after i get the timing belt cover off and let the car run and watch with a blacklight to see where its leaking and decide whether or not i need to pull the motor to fix it |
|
| Page 1 of 3 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|