| ladsm.com http://www.ladsm.com/forum/ |
|
| New Vally (818) DSM http://www.ladsm.com/forum/viewtopic.php?f=30&t=8665 |
Page 1 of 2 |
| Author: | Swift_azn [ Tue Mar 31, 2009 1:57 pm ] |
| Post subject: | New Vally (818) DSM |
Hi, My name is Vin, had the DSM for about a year been on this board for awail just never had the chance to properly introduce my self. I m from the SFV near the 118 FWY/ Topanaga. Heres some pics from my crapo phone: Front: ![]() Inside: ![]() Rear: ![]() Mods: Bolt-on Modifications | Apex 3" cat back | 3" Test Pipe | | 3" DP | 16G Evo III turbo | 190 wallbro |Precision 350 FMIC | Evo 560cc Injectors | K&N Air filter |Momo HUb w/ NRG ST-012S | Engine Management | Apexi PowerFC | Power Commander | Boost/Oil Pressure Gauge | Gizzo MS-IBC | Engine Internals Nada Suspension Modifications | 17" Konig Runaway | Tokico Illuminas 5 way adjustable | Car made 192 WHP at 9.8 lbs on a dynoJet (why only 10lbs u ask? well that was before i upgrade fuel, Car is going back to retune for 17-18lbs depends how much my IDC is doing, according to the powerfc w/ the 560cc my IDC is already at 87% at 14.8lbs but i think powerfc reads the IDC lvl higher because with the 450cc at 10lbs the IDC was at 106% LOL.Anyways looking foward to meeting you guys Best Vin |
|
| Author: | SOADweskey [ Tue Mar 31, 2009 2:46 pm ] |
| Post subject: | Re: New Vally (818) DSM |
Welcome to the site man. Good luck getting your car tuned to run some real boost. |
|
| Author: | braceyoself777 [ Tue Mar 31, 2009 4:36 pm ] |
| Post subject: | Re: New Vally (818) DSM |
Nice car! Welcome! |
|
| Author: | turboawdfanatic [ Tue Mar 31, 2009 4:39 pm ] |
| Post subject: | Re: New Vally (818) DSM |
Welcome! |
|
| Author: | 4GRIDER [ Tue Mar 31, 2009 6:36 pm ] |
| Post subject: | Re: New Vally (818) DSM |
Another 818 DSM sweet...Welcome aboard |
|
| Author: | Erix [ Tue Mar 31, 2009 7:06 pm ] |
| Post subject: | Re: New Vally (818) DSM |
front looks like car's wearing lipstick, haha. welcome man. |
|
| Author: | Swift_azn [ Tue Mar 31, 2009 7:50 pm ] |
| Post subject: | Re: New Vally (818) DSM |
| Author: | amskater [ Tue Mar 31, 2009 7:56 pm ] |
| Post subject: | Re: New Vally (818) DSM |
nice car gsx or gst? |
|
| Author: | Swift_azn [ Tue Mar 31, 2009 7:57 pm ] |
| Post subject: | Re: New Vally (818) DSM |
| Author: | clockworktoy [ Tue Mar 31, 2009 8:36 pm ] |
| Post subject: | Re: New Vally (818) DSM |
Welcome to the board and holy crap whats wrong with your IDC's? My evo injectors are around that % and im doing 18-19psi on my 60-1 |
|
| Author: | 4GRIDER [ Tue Mar 31, 2009 10:48 pm ] |
| Post subject: | Re: New Vally (818) DSM |
How does your car have 192,hp but aren't 2g turbo cars stock making 210hp??? am ? |
|
| Author: | amskater [ Tue Mar 31, 2009 10:51 pm ] |
| Post subject: | Re: New Vally (818) DSM |
| Author: | 4GRIDER [ Tue Mar 31, 2009 10:56 pm ] |
| Post subject: | Re: New Vally (818) DSM |
| Author: | amskater [ Tue Mar 31, 2009 11:02 pm ] |
| Post subject: | Re: New Vally (818) DSM |
| Author: | 4GRIDER [ Tue Mar 31, 2009 11:04 pm ] |
| Post subject: | Re: New Vally (818) DSM |
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|