| ladsm.com http://www.ladsm.com/forum/ |
|
| anyone rocking dks cams http://www.ladsm.com/forum/viewtopic.php?f=26&t=9895 |
Page 1 of 1 |
| Author: | twisted metal [ Tue Sep 15, 2009 12:42 am ] |
| Post subject: | anyone rocking dks cams |
Read they were a pretty good bang for your buck and pretty spot on with the hks's wanna hear some people I knows openions befor I dive into this with my haunt money. Also if ur planning on going to knotts halloween haunt let me know I can get discounted tickets |
|
| Author: | dj_subculture [ Wed Oct 07, 2009 11:27 pm ] |
| Post subject: | Re: anyone rocking dks cams |
I'd do some serious research and ask some of the local DSM shops before installing unknown cams. |
|
| Author: | clockworktoy [ Wed Oct 07, 2009 11:38 pm ] |
| Post subject: | Re: anyone rocking dks cams |
DKS have been around for a while, but like someone told me when i was looking for cams they're regrinds and that makes some people sketchy on weather or not to get them. I don't know anyone whose had these cams so i can't really comment any further. |
|
| Author: | dj_subculture [ Wed Oct 07, 2009 11:51 pm ] |
| Post subject: | Re: anyone rocking dks cams |
Regrinds? Then the OP should really stay away from those! |
|
| Author: | awdmonster [ Thu Oct 08, 2009 8:29 am ] |
| Post subject: | Re: anyone rocking dks cams |
| Author: | Illeagle [ Thu Oct 08, 2009 10:00 am ] |
| Post subject: | Re: anyone rocking dks cams |
I'd personally stay away. But I know their process. They don't re-weld on material and grind it down, They just cut the stock cam down. So the cams base circle will be smaller. To combat that they use shims to shim up the lifters. Its a hack job way, but the integrity of the material is as good as OEM, because it IS OEM. But I wouldn't use it. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|