| ladsm.com http://www.ladsm.com/forum/ |
|
| Attention Holset/Garrett users... http://www.ladsm.com/forum/viewtopic.php?f=26&t=8920 |
Page 1 of 1 |
| Author: | turboawdfanatic [ Thu Apr 30, 2009 4:52 pm ] |
| Post subject: | Attention Holset/Garrett users... |
There's an active thread on 'Tuners right now about proper oil drainage for people running Holset/Garrett turbos. Thought I'd post it here for anyone who might find it useful: |
|
| Author: | christ [ Thu Apr 30, 2009 10:11 pm ] |
| Post subject: | Re: Attention Holset/Garrett users... |
Good rationale on his part. I'd opt for a bigger return line diameter if I were in that boat, also. |
|
| Author: | clockworktoy [ Thu Apr 30, 2009 11:42 pm ] |
| Post subject: | Re: Attention Holset/Garrett users... |
Saw this, and im just glad im running my own 3/4" fittings on my setup. |
|
| Author: | ghetto_bird [ Fri May 01, 2009 10:20 am ] |
| Post subject: | Re: Attention Holset/Garrett users... |
don't really think it matters because oil only drips out when returning and there is no oil pressure on the way back to the pan. but it does however matter if you have a .750 hole on the turbo and .125 dia on the return line because in this case it will flood the turbo. in the case of the tuners thread best thing to do is do a Counter bore like at a 45 degree on the return line to funnel the oil flow to the pan better.that would be my idea to fix that problem. |
|
| Author: | clockworktoy [ Fri May 01, 2009 10:29 am ] |
| Post subject: | Re: Attention Holset/Garrett users... |
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|