| ladsm.com http://www.ladsm.com/forum/ |
|
| boost leak test http://www.ladsm.com/forum/viewtopic.php?f=26&t=3583 |
Page 1 of 1 |
| Author: | clockworktoy [ Tue Apr 15, 2008 7:39 pm ] |
| Post subject: | boost leak test |
| Author: | H8VTEC [ Tue Apr 15, 2008 7:41 pm ] |
| Post subject: | |
| Author: | clockworktoy [ Tue Apr 15, 2008 7:54 pm ] |
| Post subject: | |
| Author: | H8VTEC [ Tue Apr 15, 2008 9:00 pm ] |
| Post subject: | |
| Author: | clockworktoy [ Tue Apr 15, 2008 9:06 pm ] |
| Post subject: | |
| Author: | Synthetek [ Tue Apr 15, 2008 10:02 pm ] |
| Post subject: | |
| Author: | clockworktoy [ Tue Apr 15, 2008 11:12 pm ] |
| Post subject: | |
| Author: | christ [ Wed Apr 16, 2008 9:15 am ] |
| Post subject: | |
| Author: | twisted metal [ Thu Apr 24, 2008 8:54 pm ] |
| Post subject: | |
| Author: | Illeagle [ Fri Apr 25, 2008 4:02 pm ] |
| Post subject: | |
Last night I was able to say I had ZERO boost leaks, NONE WHAT SO EVER. Dialed in 30 Psi from the regulator on RRE's "Chingone" tester and no hissing anywhere none. After 15 or so pulls at 20-24psi on 95 ish octane, tore a coupler. TORE A SILICON COUPLER LIKE AN ASS GASKET IN PRISON. FUCKEN GAY! |
|
| Author: | H8VTEC [ Fri Apr 25, 2008 4:31 pm ] |
| Post subject: | |
chingon has no "e" at the end. and that tester is chingon! I take it you fixed your intake mani problem?? |
|
| Author: | Illeagle [ Fri Apr 25, 2008 5:20 pm ] |
| Post subject: | |
JBweld FTW!! Hows your trailing arm? |
|
| Author: | H8VTEC [ Fri Apr 25, 2008 6:04 pm ] |
| Post subject: | |
wrong nut! I went to the dealer and got a new one |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|