aside from porting the oil relief hole in the oil filter housing and porting the oil port on the deck side of the head, there's another way to help lower oil pressure if it's still too high, as is the case with my 2g. when i overhauled my 6 bolt, i removed the balance shafts, ported the oil filter housing and the oil port on the head and still get high oil pressure. at idle im around 17-22 psi warm, which is ok, cruising at 3k rpm im around 65psi, and at wot i peg 100psi. i did some searching and came across a part number for a weaker relief spring that will help lower oil pressure.
part # for weaker relief spring: MD015988
and here's two threads i found after searching the part number.
http://www.dsmtuners.com/search/54786/? ... 988&o=datehavent gone to order the part yet, but will be ordering it this week and installing during my next oil change and will report back with results.