ladsm.com http://www.ladsm.com/forum/ |
|
universal overhead valve spring compressor http://www.ladsm.com/forum/viewtopic.php?f=26&t=15539 |
Page 1 of 1 |
Author: | dxdsm [ Wed Mar 19, 2014 10:18 am ] |
Post subject: | universal overhead valve spring compressor |
Anyone on this forum use one of (universal ohv/ohc) types of valve spring compressor tools ? I'm wondering if it comes with the correct socket size for a 4g63/4g64 . If anyone has one that they're willing to rent/ lend that would be great too. |
Author: | -red97rum- [ Thu Mar 20, 2014 11:15 am ] |
Post subject: | Re: universal overhead valve spring compressor |
I haven't used any of those pictured. I made my own with using an old socket and a giant C-Clamp from harbor freight, it's not the fastest way, but it works just fine. IMO, if you're going to spend the money, you should just get the EuroExport tool: http://www.euroexportinc.com/mitsubishi ... compressor |
Author: | dxdsm [ Sat Mar 22, 2014 9:52 am ] |
Post subject: | Re: universal overhead valve spring compressor |
Well I just went ahead and purchased one of these. Probably should arrive on Monday. About the Euroexport tool, I looked at that, but could never tell if it would work with a 4g64 head. The boltholes and valves and spark plug guides are set up a little differently between the 4g63 and 4g64. Also, I have this 4g64 head with bad valves around, and I tried the thing with whacking the top of the valves with a socket and hammer and couldn't get anything to budge. There's one dsmer in LA with a 4g64/ Spyder who said he uses the Lisle tool. |
Author: | SOADweskey [ Mon Mar 31, 2014 7:04 pm ] |
Post subject: | Re: universal overhead valve spring compressor |
I have that tool and it worked just fine on my 4G63. |
Author: | dxdsm [ Tue Apr 01, 2014 5:23 pm ] |
Post subject: | Re: universal overhead valve spring compressor |
Which tool are you talking about? I know the Eurosport tool works on a 4g63. The question is, would it work with a 4g64 (Spyder). Anyways, I ended up not using the OHV/OHC tool and took this 4g64 head to a machine shop. |
Author: | SOADweskey [ Wed Apr 02, 2014 10:37 am ] |
Post subject: | Re: universal overhead valve spring compressor |
I have the universal one you linked to on eBay. |
Author: | dxdsm [ Fri May 16, 2014 9:19 am ] |
Post subject: | Re: universal overhead valve spring compressor |
is as far as I got with the Ebay tool and the 4g64 head. I decided this was not the way it was supposed to be bolted to the block and ended up not using it. One thing I couldn't determine is whether or not the cam needs to come off... seems like with the rocker shaft out it shouldn't be necessary. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |