I think my talon us ready. Changed to a blacktop w/ghetto rigged wires. No one near has a pigtail.
Sent from my LG-P999 using Tapatalk 2
| ladsm.com http://www.ladsm.com/forum/ |
|
| Crunch time. http://www.ladsm.com/forum/viewtopic.php?f=26&t=15292 |
Page 2 of 3 |
| Author: | DSM99 [ Sun Jul 07, 2013 8:10 pm ] |
| Post subject: | Re: Crunch time. |
That temp is normal does it heat up past 205? Mine stays constant on 200 via dsmlink. Just keep idling it with the cap off and squeeze the top radiator hose. Do that til you stop seeing bubbles. mine took awhile to do that. For me just like I thought the wires and plugs were fine. Still new and gapped to spec. It was a boost leak. A few of them from the emissions crap I took off. I took care of them but now its leaking from the egr block of plate. I had the egr block off for some yrs now. I tired to tighten it but but no cigar. I'm just gonna jb weld that bitch shut. Sent from my GS3 using Tapatalk 2 |
|
| Author: | LOLVTEC [ Sun Jul 07, 2013 11:31 pm ] |
| Post subject: | Re: Crunch time. |
I just got a coke can and cut 4 pieces and put rtv. Sealed like a pro lol Sent from my iPad using Tapatalk |
|
| Author: | DSM99 [ Sun Jul 07, 2013 11:35 pm ] |
| Post subject: | Re: Crunch time. |
Took the plate off and the gasket was shot. Missing a piece. I just put a thin even layer of rtv and put it back on. It should hold until I install my SMIM. I'm gonna let it dry over night and boost leak test it in the morning. It should do the trick Sent from my GS3 using Tapatalk 2 |
|
| Author: | bras_33 [ Mon Jul 08, 2013 9:34 am ] |
| Post subject: | Re: Crunch time. |
like what gabe said, i saw the aluminum can trick work to perfection... |
|
| Author: | DSM99 [ Mon Jul 08, 2013 2:16 pm ] |
| Post subject: | Re: Crunch time. |
Damn no cigar. I fixed all boost leaks tested it and even picked up my vacuum at idle. But still breaks up on free reving it Sent from my GS3 using Tapatalk 2 |
|
| Author: | LOLVTEC [ Wed Jul 10, 2013 11:21 pm ] |
| Post subject: | Re: Crunch time. |
I think my talon us ready. Changed to a blacktop w/ghetto rigged wires. No one near has a pigtail. Sent from my LG-P999 using Tapatalk 2 |
|
| Author: | DSM99 [ Thu Jul 11, 2013 6:55 pm ] |
| Post subject: | Re: Crunch time. |
Not me my shit is still breaking up on free reving it. I'm still tweeking it and gonna give it one last shot tomorrow. I wonna drive this thing so bad already. If nothing changes I'm gonna miss MOD Sent from my GS3 using Tapatalk 2 |
|
| Author: | Synthetek [ Thu Jul 11, 2013 7:29 pm ] |
| Post subject: | Re: Crunch time. |
| Author: | DSM99 [ Thu Jul 11, 2013 7:44 pm ] |
| Post subject: | Re: Crunch time. |
Check, check and check. It's idling perfect just doesn't rev up nice at all. Sent from my GS3 using Tapatalk 2 |
|
| Author: | LOLVTEC [ Thu Jul 11, 2013 8:31 pm ] |
| Post subject: | Re: Crunch time. |
Post a video Sent from my iPad using Tapatalk |
|
| Author: | Illeagle [ Fri Jul 12, 2013 1:53 pm ] |
| Post subject: | Re: Crunch time. |
I should get going and get my car running.....lol....seriously... |
|
| Author: | LOLVTEC [ Fri Jul 12, 2013 2:33 pm ] |
| Post subject: | Re: Crunch time. |
thats what you said on our beach meet. Sent from my LG-P999 using Tapatalk 2 |
|
| Author: | DSM99 [ Fri Jul 12, 2013 4:39 pm ] |
| Post subject: | Re: Crunch time. |
K. I'm back home. I'm try n get this bitch running right. Going down to the wire Sent from my GS3 using Tapatalk 2 |
|
| Author: | DSM99 [ Fri Jul 12, 2013 7:52 pm ] |
| Post subject: | Re: Crunch time. |
So I finally got a cell 0100 air flow malfunction. The maf is dead So it's 8pm and I'm gonna try to switch to speed density for the first time the night before MOD smh. Why you ask??? Because race car!!! Sent from my GS3 using Tapatalk 2 |
|
| Author: | DSM99 [ Sat Jul 13, 2013 2:22 am ] |
| Post subject: | Re: Crunch time. |
Ok goodnight/goodmorning the GSX won't be making it after all. I tried but couldn't come through. I'll still be at MOD see you guys in a couple hrs. But I got a real nice surprise coming real soon. I'll make another thread about that very shortly in the near future. (Operation 400+ awhp) Sent from my GS3 using Tapatalk 2 |
|
| Page 2 of 3 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|