Author |
Message |
SOADweskey
No More 2.3L
Joined: Tue May 22, 2007 7:36 pm Posts: 4412 Location: Jacksonville, FL
|
Re: Finaly Found Time to Tear my Engine Apart.
The worlds slowest engine rebuild is still in progress. Here is a little Thanksgiving update. I have a fresh short block on the engine stand and my head has been freshened up with a bunch of new valves and guides. I have a new front case on the way since I found a crack on my old one. Here are some pics of what has been sitting around my garage.
And the back of my car is pretty much just a misc parts storage area.
_________________ Boost Creep is your turbo's way of calling you a little bitch for not running enough boost.
452 AWHP 446 lb ft of torque e85 FTW!!
"They are cool manly men now those DSM owners. Before it was just pasty white nerds, metro hair Asian kids and fruit pickers. They do real car club stuff and everything. Sometimes they even spend money here :-/"
-Mike W
|
Thu Nov 28, 2013 10:16 am |
|
|
-red97rum-
Senior Member
Joined: Mon Aug 10, 2009 9:57 am Posts: 1077 Location: Ontario, CA [IE]
|
Re: Finaly Found Time to Tear my Engine Apart.
Keep up the progress Mr. Wes!
_________________-Dustin 1992 Tsi Auto Swapped 10.67@126mph
|
Tue Dec 03, 2013 10:15 am |
|
|
awdmonster
frank the tank
Joined: Thu Jun 14, 2007 6:38 pm Posts: 2377 Location: At the stripclub in Ontario!
|
Re: Finaly Found Time to Tear my Engine Apart.
Who built the motor?
_________________ 90 eclipse GSX 609hp 450tq E85 1/4mile 11.7 @ 121 mph personal best on a 20g 1/4mile 11.6 @125 mph personal best on a FP GREEN on a wounded HG 1/4mile 10.5 @ 136 mph personal best 3582R Las Vegas 1/4mile 10.41@ 137.9 mph Fontana personal best 3582R 5 Gears...4 wheel drive/steer...3 Diamonds...2 cams...1 Turbo...0 Reliability
|
Fri Dec 06, 2013 1:23 am |
|
|
SOADweskey
No More 2.3L
Joined: Tue May 22, 2007 7:36 pm Posts: 4412 Location: Jacksonville, FL
|
Re: Finaly Found Time to Tear my Engine Apart.
Wholesale Auto Machine down here in San Diego. They came highly recommended by Kris.
_________________ Boost Creep is your turbo's way of calling you a little bitch for not running enough boost.
452 AWHP 446 lb ft of torque e85 FTW!!
"They are cool manly men now those DSM owners. Before it was just pasty white nerds, metro hair Asian kids and fruit pickers. They do real car club stuff and everything. Sometimes they even spend money here :-/"
-Mike W
|
Mon Dec 09, 2013 9:01 pm |
|
|
SOADweskey
No More 2.3L
Joined: Tue May 22, 2007 7:36 pm Posts: 4412 Location: Jacksonville, FL
|
Re: Finaly Found Time to Tear my Engine Apart.
I spent a little bit of time working on the engine last night. I got out my JB Weld and put the balance shaft delete plug in my new front case and then put it on the engine and I put the head on last night. Also my cams came in last week so I will be installing them and setting timing soon. Also I need to really clean out my oil pan and then mount it up so I can prime the engine with a power drill prior to putting the timing belt on.
_________________ Boost Creep is your turbo's way of calling you a little bitch for not running enough boost.
452 AWHP 446 lb ft of torque e85 FTW!!
"They are cool manly men now those DSM owners. Before it was just pasty white nerds, metro hair Asian kids and fruit pickers. They do real car club stuff and everything. Sometimes they even spend money here :-/"
-Mike W
|
Mon Dec 23, 2013 10:15 am |
|
|
SOADweskey
No More 2.3L
Joined: Tue May 22, 2007 7:36 pm Posts: 4412 Location: Jacksonville, FL
|
Re: Finaly Found Time to Tear my Engine Apart.
It has been a while since I updated in here. My car is officially together and running. Unfortunatly I had to head back to Guam before I got to break it in or tune it. At least I have it all together in one piece so if my wife has to pack up our house while I am gone she will be able to do something with it.
Here are some recent pictures of it. Freshly built HX-35 center section to replace the one that was on the car when the last engine died.
Here is the engine bay all back together with the exception of the JMF heatshield over the exhaust manifold.
And here is the car back in the garage after it's first wash in about two years.
I still need to adjust the hood so that it lines up with the fenders better, do a boost leak test, put some mile on the engine, adjust the tune for the lower displacement and new cams, and eventually install an IAT sensor so that I can go speed density and loose the MAF.
It does suck that I got it running and was only able to put about three miles on it before hopping on a plane back to Guam. At least it is ready for some good times when I get back to California.
_________________ Boost Creep is your turbo's way of calling you a little bitch for not running enough boost.
452 AWHP 446 lb ft of torque e85 FTW!!
"They are cool manly men now those DSM owners. Before it was just pasty white nerds, metro hair Asian kids and fruit pickers. They do real car club stuff and everything. Sometimes they even spend money here :-/"
-Mike W
|
Sat Oct 04, 2014 3:06 am |
|
|
BertGST
Senior Member
Joined: Fri Feb 18, 2011 12:20 pm Posts: 560 Location: Bell Gardens
|
Re: Finaly Found Time to Tear my Engine Apart.
Very nice. Looks real good.
|
Sat Oct 04, 2014 8:13 pm |
|
|
BOOST
Senior Member
Joined: Wed May 23, 2007 3:51 pm Posts: 2189 Location: L.A.
|
Re: Finaly Found Time to Tear my Engine Apart.
Thanks for the update Wes
|
Sat Oct 04, 2014 9:29 pm |
|
|