ladsm.com http://www.ladsm.com/forum/ |
|
replacing valve springs with motor assembled http://www.ladsm.com/forum/viewtopic.php?f=26&t=14653 |
Page 2 of 2 |
Author: | Black_gst [ Thu Aug 09, 2012 6:15 am ] |
Post subject: | Re: replacing valve springs with motor assembled |
Author: | Illeagle [ Thu Aug 09, 2012 5:28 pm ] |
Post subject: | Re: replacing valve springs with motor assembled |
we use a leak down tester, so charge pressure is 100psi, whatever is in the cylinder depends on how well the cylinder seals. But the more the better. 100psi is good. Keep that cylinder at TDC, put the car in gear and ebrake up so the motor cant rotate when you pressurize the cylinder. In case the vavle drops in, it wont fall all the way in. |
Page 2 of 2 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |