How much food, beer, and $$?
| ladsm.com http://www.ladsm.com/forum/ |
|
| turbo rebuild http://www.ladsm.com/forum/viewtopic.php?f=26&t=14114 |
Page 1 of 1 |
| Author: | dsmchevyguy [ Mon Feb 27, 2012 12:50 am ] |
| Post subject: | turbo rebuild |
Anyone know where I can pick up a good 16g rebuild kit ? |
|
| Author: | christ [ Mon Feb 27, 2012 8:42 am ] |
| Post subject: | Re: turbo rebuild |
http://www.turbocity.com/ |
|
| Author: | kingcoyote [ Mon Feb 27, 2012 9:53 am ] |
| Post subject: | Re: turbo rebuild |
If you can wait a couple days, tradergreg sells good kits cheaper than you'll find at local shops: http://tradergreg.ecrater.com/p/2826551 ... rbocharger |
|
| Author: | -red97rum- [ Mon Feb 27, 2012 10:12 am ] |
| Post subject: | Re: turbo rebuild |
| Author: | slidesidwayz [ Wed Feb 29, 2012 9:29 am ] |
| Post subject: | Re: turbo rebuild |
How is the quality on these kits? |
|
| Author: | 4G63KING [ Wed Feb 29, 2012 8:27 pm ] |
| Post subject: | Re: turbo rebuild |
No thread jacking, Just a quick question... Anybody on the forum do rebuilds for beer n food maybe? |
|
| Author: | -red97rum- [ Thu Mar 01, 2012 10:32 am ] |
| Post subject: | Re: turbo rebuild |
| Author: | -red97rum- [ Thu Mar 01, 2012 10:32 am ] |
| Post subject: | Re: turbo rebuild |
| Author: | slidesidwayz [ Thu Mar 01, 2012 11:55 am ] |
| Post subject: | Re: turbo rebuild |
How much food, beer, and $$?
|
|
| Author: | -red97rum- [ Thu Mar 01, 2012 1:16 pm ] |
| Post subject: | Re: turbo rebuild |
If none of the hard parts are damaged, ie: turbine wheel & shaft, compressor wheel, chra... You pay for parts and give me $50. The rebuild kits are $50 with $5.50 shipping, so pretty much $105 for a new turbo. The more beer and food, the lower the price goes 
|
|
| Author: | slidesidwayz [ Thu Mar 01, 2012 1:55 pm ] |
| Post subject: | Re: turbo rebuild |
What is a good way to get rid of rust off the turbine wheel? I wish i was joking 
|
|
| Author: | christ [ Thu Mar 01, 2012 2:23 pm ] |
| Post subject: | Re: turbo rebuild |
50,000 rpm |
|
| Author: | -red97rum- [ Thu Mar 01, 2012 3:34 pm ] |
| Post subject: | Re: turbo rebuild |
Pull the turbo apart and clean everything. I usually tape off the shaft and gently glass bead the turbine wheel, comes out looking brand new. |
|
| Author: | slidesidwayz [ Sat Mar 10, 2012 12:31 am ] |
| Post subject: | Re: turbo rebuild |
This might sound like a dumb question or like im joking but what would you use to glass bead the turbine wheels? Would that be a dremel?? |
|
| Author: | Illeagle [ Tue Mar 20, 2012 7:39 pm ] |
| Post subject: | Re: turbo rebuild |
media blaster, blast cabinet. Some way of throwing sand and high speed at it. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|