A lil info I'd like to share on building a motor/sheptrans
Well if anybody planning on building a motor he is some Info I learned:
If you dont get the HD wiseco's and get 8.3:1 or 9.0:1 piston kit and you plan on boosting over 28 pds Wiseco recommend to get HD wrist pins Part # S709 (wrist pin) to be on the much safer side...
And if your boosting over 35 pds to get L-19 Headstuds The torque on those ARP L-19 with the the ARP heavy duty Grease is From 120-130 ft. Tq Pds.......
And a stage 4 Sheptrans recommends on 600 plus horse power to use all Redline Lightweight Shock proof From 500-600 to use a 50/50 mix MT 90/ shockproof and 400-500 hosrepower just MT 90 However Most cars use MT 85 and I asked them about that and they said that MT 85 is thinner and dont recommend it on their trans...
And if anyone has info they liked to share I would appreciate it Thanks.................
_________________ *****Fir$t U Build H3r Then L3t H3r T8k u 4 A R1de*****
Users browsing this forum: No registered users and 4 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum