| ladsm.com http://www.ladsm.com/forum/ |
|
| A lil info I'd like to share on building a motor/sheptrans http://www.ladsm.com/forum/viewtopic.php?f=26&t=12558 |
Page 1 of 1 |
| Author: | 50trimanic [ Wed Mar 16, 2011 9:24 am ] |
| Post subject: | A lil info I'd like to share on building a motor/sheptrans |
Well if anybody planning on building a motor he is some Info I learned: If you dont get the HD wiseco's and get 8.3:1 or 9.0:1 piston kit and you plan on boosting over 28 pds Wiseco recommend to get HD wrist pins Part # S709 (wrist pin) to be on the much safer side... And if your boosting over 35 pds to get L-19 Headstuds The torque on those ARP L-19 with the the ARP heavy duty Grease is From 120-130 ft. Tq Pds....... And a stage 4 Sheptrans recommends on 600 plus horse power to use all Redline Lightweight Shock proof From 500-600 to use a 50/50 mix MT 90/ shockproof and 400-500 hosrepower just MT 90 However Most cars use MT 85 and I asked them about that and they said that MT 85 is thinner and dont recommend it on their trans... And if anyone has info they liked to share I would appreciate it Thanks................. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|