ladsm.com http://www.ladsm.com/forum/ |
|
John's 2.4 G4CS Progress http://www.ladsm.com/forum/viewtopic.php?f=26&t=10895 |
Page 1 of 2 |
Author: | Velocitysport31 [ Sun Mar 07, 2010 7:05 pm ] |
Post subject: | John's 2.4 G4CS Progress |
Whats up guys, over the last few weeks Ive been dropping in my new g4cs motor. I have a few last loose ends to figure out before I turn the key. Here's what Ive go so far. -Built G4CS -Eagle Rods, Wiesco pistons 8.8:1 -Clevite bearings -ARP Main's Aligned honed -Balanced and Blueprinted -Built Head -ported and polished -3g lifters -FP2 Cam's -Built W4A33 Auto trans -Reworked valve bodies -Shift kit -Upgraded end-clutches -4k Stall torque convereter -SB G60 Turbo with anti surge -Megan Downpipe -3" Exhaust -Dejon Intake -Fluiddampnr Crank pulley -880 injectors -DSM Link V3 -AEM Wideband -AEM Trueboost -walbro 255 -Aeromotive FPR -RRE Catchcan -94 GSX Big Brakes |
Author: | blkturbogsx [ Mon Mar 08, 2010 9:54 am ] |
Post subject: | Re: John's 2.4 G4CS Progress |
dam that looks good man |
Author: | DSMP [ Tue Mar 09, 2010 9:38 am ] |
Post subject: | Re: John's 2.4 G4CS Progress |
What kind of airflow metering are you going to use? |
Author: | socalGST [ Tue Mar 09, 2010 9:54 am ] |
Post subject: | Re: John's 2.4 G4CS Progress |
nice! |
Author: | -red97rum- [ Tue Mar 09, 2010 10:17 am ] |
Post subject: | Re: John's 2.4 G4CS Progress |
Looking good man, I can't wait to see that thing run! |
Author: | Velocitysport31 [ Tue Mar 09, 2010 11:54 am ] |
Post subject: | Re: John's 2.4 G4CS Progress |
Gm mass with Ecm link cable for v3 |
Author: | SOADweskey [ Tue Mar 09, 2010 12:17 pm ] |
Post subject: | Re: John's 2.4 G4CS Progress |
How do you get that water pipe to hook up to the thermostat housing? |
Author: | Black_gst [ Tue Mar 09, 2010 12:23 pm ] |
Post subject: | Re: John's 2.4 G4CS Progress |
Author: | SOADweskey [ Tue Mar 09, 2010 12:37 pm ] |
Post subject: | Re: John's 2.4 G4CS Progress |
Ah, I'm so used to the standard 2G style where the water pipe goes to the housing. |
Author: | Black_gst [ Tue Mar 09, 2010 12:40 pm ] |
Post subject: | Re: John's 2.4 G4CS Progress |
thats what i figuered... 6 Bolt FTW lol |
Author: | Velocitysport31 [ Tue Mar 09, 2010 2:16 pm ] |
Post subject: | Re: John's 2.4 G4CS Progress |
Velocitysport fuel rail mod. |
Author: | Velocitysport31 [ Wed Mar 10, 2010 2:36 pm ] |
Post subject: | Re: John's 2.4 G4CS Progress |
So far today I finished my oil feed and return lines, Installed a mechanical Autometer guage at the ofh to see were my oil pressure is at, and used used a torch and ball hammer to clearance my water pipe. |
Author: | SOADweskey [ Wed Mar 10, 2010 5:17 pm ] |
Post subject: | Re: John's 2.4 G4CS Progress |
Looks nice man, I love that block color by the way. Hopefully your oil pressure will be easier to control than mine. |
Author: | Velocitysport31 [ Sat Mar 13, 2010 1:14 am ] |
Post subject: | Re: John's 2.4 G4CS Progress |
Cars getting closer here some more pics of the progress. |
Author: | jstoned1 [ Tue Mar 16, 2010 4:10 pm ] |
Post subject: | Re: John's 2.4 G4CS Progress |
hows it running? |
Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |