| ladsm.com http://www.ladsm.com/forum/ |
|
| wtb master clutch cylinder and t3 exhaust manifold http://www.ladsm.com/forum/viewtopic.php?f=24&t=12011 |
Page 1 of 1 |
| Author: | Spyder97 [ Thu Oct 14, 2010 4:20 pm ] |
| Post subject: | wtb master clutch cylinder and t3 exhaust manifold |
Hello everyone. I need a master clutch cylinder. Looking for a new oem. If anyone has one or knows where I can get one at a reasonable price please let me know. I replaced mine with a cheap autozone one a few months ago and already it broke... I also need a t3 exhaust manifold, looking for a cast manifold. I have an old tubular from turboperformance that has a leak. not trying to break the piggy bank with a real expensive one. if anyone has one or knows of a good/ inexepnsive one please let me know. Thanks!!!! |
|
| Author: | Black_gst [ Fri Oct 15, 2010 7:21 am ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
i have a turbonetics T3 mani with provisions for a 2 bolt 38mm WG but i have a block off plate if you dont want to use the Eternal WG option. its part of a turbo setup im trying to seel but i think im going to have better luck piecing it out. heres what it looks like http://www.forcedinductions.com/product2.htm theres nothing wrong with it im just going with a tubular setup asking $250 |
|
| Author: | CardShark [ Tue Oct 19, 2010 1:01 pm ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
Interesting that they have different part #'s for 1G and 2G....I wonder what the difference is. |
|
| Author: | Black_gst [ Tue Oct 19, 2010 1:38 pm ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
My guess would be the larger studs that came on some of the 1g's |
|
| Author: | Spyder97 [ Thu Oct 21, 2010 5:52 pm ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
Goin to the dealer tomorrow to buy the master clutch cylinder unless someone can help me out.. 170 bucks ouch... Waiting on blackgst for that manifold. Might be a couple weeks till it's ready. Thanks Adam. But he is Also out in The IE. If anyone else has any ideas for a t3 manifold let me know.. Thanks! Ps. Does anyone have a driver side, sideskirt front cap?? The one behind the wheel. Thanks!! |
|
| Author: | amskater [ Thu Oct 21, 2010 6:25 pm ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
if you can find a used oem master cylinder, you can buy an autoparts master to rebuild the oem as good as new |
|
| Author: | Spyder97 [ Thu Oct 21, 2010 7:14 pm ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
Amskater. How do I do that? I still have my old part. The autozone one would always sqeak until the end that holds the clutch peddle broke. It's still on but takes a lot to make it workespecially with a 2600 presure plate. The autozone one is still under warranty. I was thinking of complaining till I got my money back. N buying a new one. Since I've been stuck twice because of this same problem. |
|
| Author: | amskater [ Thu Oct 21, 2010 8:00 pm ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
here is a walk-through http://ladsm.com/forum/viewtopic.php?f=5&t=9141 |
|
| Author: | CardShark [ Thu Oct 21, 2010 9:30 pm ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
| Author: | amskater [ Thu Oct 21, 2010 9:35 pm ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
| Author: | Spyder97 [ Tue Dec 07, 2010 11:14 pm ] |
| Post subject: | Re: wtb master clutch cylinder and t3 exhaust manifold |
Thanks amskater!!! I still havnt fixed the aster cylinder but that walkthrough is exactly what I need! I still need a cast T3 exhaust manifold. If anyone has one or knows where I can find the Erl for cheap... |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|