First up is a stainless oil feed line from the OFH. In this, there will be a -4AN stainless steal line (approx 24" in length). One side is a 90* angle to be attached to the turbo and the other is a straight fitting. Will also come with a 90* -4 to 3/8 NPT fitting to attach to the oil filter housing. The only thing that you will need to attach this to a turbo being fed from the OFH, would be a fitting from the turbo to a -4AN. Something such as a banjo fitting that goes into a male -4, or a 90* angle male -4 to male T3/T4 feed fitting, or a male-male oil restrictor fitting such as ones used on BB turbos.
Pictures:
I'm thinking $30. Reason for selling is because I have a new one coming that is going to feed from the head.
Next up is a spare gasket that I have laying around that I don't need.
A SS DSM o2 housing gasket $10
Pictures:
PM for buying or questions. Thank you.