Dejon Tool 3" Intake (Lowered Price)
This is going for sale because well...I need a 4" now
. It's Black and it is in decent condition and has the BOV return tube so it will work with a DSM running the stock 2G MAS. Retail is about $160 I believe because it is only the BOV return and not the charcoal canister or the Valve cover breather. I'll go take a picture of it right now. Just wanted to post this up in case anyone needs it and would want it by tonight. Asking $75 for it. If it doesn't sell, I'll just hold onto it and include it when I sell the GT28.
This goes to 4" oval at the MAS and shrinks down to 3" for the turbo inlet. With the proper couplers, it can fit a stock turbo as well as any of the Mitsu series (T25/T28/14b/S16G/B16G/E16G/18G/20G with 2" inlet/20G with 3" inlet) as well as any other turbo make with a 3" inlet.
It is a little beat up and had a hole drilled on the bottom of it for a pressure source that was covered with a bolt and some JB weld by the previous owner. If the buyer would like, I can spray it down with some DEI high temp black.
Thanks for looking