| ladsm.com http://www.ladsm.com/forum/ |
|
| 420a Home made turbo kit- cheap 250 http://www.ladsm.com/forum/viewtopic.php?f=15&t=4181 |
Page 1 of 1 |
| Author: | BOOST [ Mon Jun 16, 2008 1:50 pm ] |
| Post subject: | 420a Home made turbo kit- cheap 250 |
So as of right now im selling my custom turbo kit that i was piecing together. Need to get rid of my debt asap. So my lost is your gain. 1. A custom manifold for a 420a. It was working fine till one of the welds started to crack. ANY EXHAUST SHOP CAN EASILY WELD THIS! 2. a T3/T4 turbo. Its a borg warner ihi. The turbo roughly has 70,xxx miles. THIS IS A VERY FAST SPOOLING TURBO. Its in good condition with no abnormal shaft play and no smoking. 3. An Evo VIII Intercooler. It has the usual bent fins. Nothing too major. Whats great about this is its ease of installation onto the 2G radiator support, as the mounting tabs are already there. 4 Vortech FMU 12:1 5. BOV- I have a 1st gen BOV and also a generic BOV 6. I have a home made FCD that was made by one of the original makers over at 2gnt.com( will give you link on how it works) 7.NEW Dodge SRT-10 ATX Tranny Cooler (some bent fins) Includes almost everything to get your turbo set up started. All it needs is a few more items - Going as cheap as 250 bucks |
|
| Author: | socalGST [ Wed Jun 25, 2008 4:13 pm ] |
| Post subject: | |
| Author: | BOOST [ Wed Jun 25, 2008 4:19 pm ] |
| Post subject: | |
| Author: | socalGST [ Wed Jun 25, 2008 4:22 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|