This is a steal $325 bucks FIRST PERSON TAKES ALL
includes:
-20g turbo with 16g housing ported with flapper removed
-20g actuator just incase you want to run it internally
-external wastegate
-o2 housing
-t3 hotside with o2 housing
Well guys I ran this hahn 20g for about 100 miles..When I was putting everything on so that I can run a external wastegate I notice that there was in and out shaft play. The turbo WILL need a rebuild. A good rebuild cost around $300 bucks. need this money to install my clutch. Wastegate has about 20 miles on it if that. O2 housing has been custom tig welded by my work. I have the 16 housing so you can bolt it up to the stock mani or I have the t3 housing has a plate blocking the wastegate flap for external gate, but can be grinded off to use internally. the flapper still moves freely. Also including the 20g actuator. need this gone ASAP
call me at 805 210 2497 name is chris
pM me or e mail me at blkturbogsx@yahoo.com
or my AIM screenname is turbodsm007
