Going back to compeltely stock so Im getting rid of some things:
FMIC (unknown brand) with 3" piping from j-pipe (for 16g or 14b) to throttle body. 200
1G throttle body with FIAV and ISC block off plate. Recently replace shaft seals. 80
2.5" TB elbow. Very nice piece. 30
2g intake manifold. Ported for 1g TB. EGR block off plate but EGR is still installed for visual purposes. Super clean almost looks polished. 60
Dahlback Racing BOV. Works great and sounds great even recirced. 60
Evo 3 16G ported hot side. Still has functional internal flapper but I wired it open for the external gate. 350
SS o2 housing set up for external gate with atmosphere dump. SOLD
Godspeed external WG 11psi spring. works perfectly. 70
DNA racing upper strut bar and lower rear tie bar. 30 each
unknown brand rear upper x brace. Attaches to rear seatbelt bolts, strut tower, and trunk deck. 100
uknown brand larger sway bars front and back. 120 for the set. I will need a stock front sway bar.
3" Downpipe removes Catalytic converter. 100
3" Cat back exhaust. Almost new. 300
If all above sells then I will sell my EPROM ECU with DSM link and all cables set up for a 2g with stock injectors and stock MAF. 550.
Text for pics. 7606943303 Mike.